Dayton 5DVR7 Downblast Vent Direct Drive 1/20 hp 115V 495 cfm
Direct-drive centrifugal roof exhaust fan delivers 495 cfm at 0.000 in static pressure with a 1/20 hp 115V motor
- Product typeDrain Components
- Direct-drive motor eliminates belt wear
- 1/20 hp motor powers 495 cfm airflow
- 115 V single-phase supply fits standard circuits
- Factory-assembled unit installs without field alignment
- Square 17 in base simplifies roof curb fit
Direct-drive centrifugal roof exhaust fan
This Dayton 5DVR7 is a downblast centrifugal roof exhaust fan with direct-drive construction and an 8-inch wheel. It ships assembled and includes the motor and drive package. The unit runs on 115V AC single-phase power and uses a 1/20 hp motor to deliver 495 cfm at .000 in static pressure.
Installers needing a compact clean-air roof
The square 17-by-17-inch base and direct-drive layout suit roofs where belt maintenance is impractical and the air stream is clean. Maximum static pressure of 1/2 in wc limits use to low-resistance duct runs. Installations that require high-static-pressure capability, larger airflow volumes or belt-driven serviceability should look at other models.
495 cfm at zero static pressure
This airflow rating at .000 in wc is the key figure for sizing the fan to the ventilation load. If the system has any measurable duct resistance, the delivered airflow will drop below this value and a higher-capacity unit will be required.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $360.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dayton |
| Model name | 5DVR7 |
| Product type | Drain Components |
Questions about this item
What is the maximum static pressure this downblast vent can handle before airflow drops off?
The unit is rated for a maximum static pressure of 1/2 in wc, which is the limit where sustained airflow begins to fall.
How much electrical power does the motor draw when the fan runs continuously?
The direct-drive motor is rated at 1/20 hp on 115 V AC single-phase power.
What roof opening or curb size is needed to mount the 17 in square base?
The base measures 17 in by 17 in square, so the roof curb or opening must accommodate that footprint.
More in Drain Stoppers, Strainers & Traps
Similar items
Liberty 405 Commercial Sink Pump System 1/2 HP 2 In
- Drain Components
- Polyolefin
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Apollo 7650801 2 in FNPT Stainless Steel Ball Valve Inline Trap
- Drain Components





