We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 5LAG5 right-angle DC gearmotor, silver metal casing, 5/8 inch output shaft

Dayton

Dayton 5LAG5 DC Gearmotor 24 V 150 RPM

SKU CH-YYTR-GV86H

Right-angle DC gearmotor delivers 150 RPM at 24 V with 63 in-lb torque and 175 lb overhung load capacity

  • Right-angle shaft fits tight spaces
  • 150 RPM output speed for controlled motion
  • 63 in-lb maximum torque handles heavy loads
  • 175 lb overhung load capacity supports radial force
  • 24 V DC permanent magnet motor enables reversible operation

Dayton 5LAG5 DC Gearmotor — application

This 24 V DC gearmotor delivers 150 RPM output with a 10:1 reduction ratio. It suits automation, conveyor and positioning tasks that need right-angle shaft orientation and reversible rotation. The 1/8 hp permanent-magnet motor provides 63 in-lb maximum torque for moderate-load equipment.

Mounting and wiring notes

The totally enclosed non-ventilated enclosure allows mounting at any angle without orientation constraints. Ball bearings on the motor and roller bearings on the gearcase support the 175 lb overhung load capacity on the 5/8 in output shaft. Verify shaft alignment and voltage polarity before energising to avoid premature bearing wear or reversed rotation.

Deciding specification

The fixed 150 RPM nameplate speed at 24 V DC is the single figure that determines whether this gearmotor matches the required cycle time. Buyers who need a different output speed or a higher torque rating at this voltage cannot use this unit.

How it compares

Measured against everything we stock in Bearings, Belts & Drive Components, at today’s prices. Recalculated every night.

Price $430.99
Pricier than about 92% of the 693 comparable items (median $35.99).

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the motor is delivering the rated 150 RPM after installation?

Measure the output shaft speed with a tachometer under load; it should read 150 RPM when supplied with 24 V DC.

What accessories are included and which items such as a mounting bracket or power supply must be purchased separately?

The gearmotor ships as a single unit with a 5/8 in output shaft and ball/roller bearings; mounting hardware and a 24 V DC power source are not included.

Should I choose a different gear ratio or voltage version for higher torque or speed?

This model is fixed at a 10:1 ratio, 24 V DC, 150 RPM and 63 in-lb maximum torque; other ratios or voltages would be separate part numbers.

More in Bearings, Belts & Drive Components

Similar items