We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dayton 1/3 hp ceiling fan motor open frame with 5 inch shaft and 36 inch leads

Dayton

Dayton 5RHU0 1/3 hp ceiling fan motor 825 rpm 208-230V 4-speed

SKU CH-0SE7-SN2D4

A 1/3 hp ceiling fan motor running at 825 rpm with four speeds on 208-230V power

  • Product typeMotors
  • 1/3 hp output drives demanding airflow
  • Four-speed PSC design matches load precisely
  • 825 rpm at 60 Hz for quiet operation
  • 208-230 V single-phase fits standard wiring
  • Auto thermal protection prevents overheating damage

Motor Specifications

The Dayton 5RHU0 is a permanent split capacitor motor rated at 1/3 hp with a nameplate speed of 825 rpm. It operates on 208-230V AC single-phase power at 60 Hz and draws between 1.0 and 2.2 full-load amps. The 48YZ frame unit includes a 5-inch shaft and 36-inch leads for wiring flexibility.

Application Suitability

This motor suits installations requiring four-speed control and continuous duty in ambient temperatures up to 60 degrees Celsius. Automatic thermal protection and Class B insulation support reliable long-term operation. It is not intended for applications needing sealed enclosures, higher horsepower ratings, or voltage supplies outside the 208-230V range.

Installation Requirements

The open air-over enclosure demands adequate airflow around the motor housing for cooling. Stud mounting allows all-angle positioning, while reversible CW/CCW rotation adapts to various blower or fan configurations. A compatible run capacitor and speed selector must be supplied separately to enable the four-speed function.

How it compares

Measured against everything we stock in Indoor & Outdoor Ceiling Fans, at today’s prices. Recalculated every night.

Price $200.99
Pricier than about 75% of the 444 comparable items (median $99.99).

Specifications

Product
Brand nameDAYTON
Product typeMotors

Questions about this item

What voltage supply and wiring are needed for this 208-230V AC motor?

Provide a 208-230V AC, 60 Hz single-phase supply. The motor draws 2.2 A at 1/3 hp and 1.0 A at 1/6 hp; use wire sized for that current and a compatible disconnect.

Will the 48YZ frame and 5 in shaft fit the mounting studs and blower wheel I already have?

The motor uses a 48YZ frame with stud mounting and a 5 in shaft; verify your blower wheel bore and stud pattern match those dimensions before installing.

How can I confirm the motor runs at the correct 825 RPM across all four speeds?

With power applied, use a contact or laser tachometer on the shaft; each speed tap should read approximately 825 RPM at full load, and the auto thermal protector must not trip during continuous operation.

More in Indoor & Outdoor Ceiling Fans

Similar items