Dayton 6KWK5 11 in downblast vent direct drive 115V 571 cfm
Centrifugal downblast roof exhaust fan with 11 in wheel, direct-drive 115 V motor and 571 cfm airflow at .000 in static pressure
- Product typeDrain Components
- Direct-drive motor removes belt maintenance
- 11 in wheel moves 571 cfm at zero static pressure
- 115 V single-phase power fits standard outlets
- 1/6 hp motor handles clean-air exhaust duties
- Square 22 in base simplifies roof mounting
Direct-drive roof exhaust fan
The Dayton 6KWK5 is a centrifugal downblast fan built for roof mounting with a direct-drive motor. It ships fully assembled and includes the motor and drive package. The unit delivers 571 cfm at zero static pressure and is rated for clean-air environments.
Suited for single-phase 115 V installations
This fan fits projects that can supply 115 V AC single-phase power and need a compact 11-inch wheel in a 22-inch square base. It is not suited for systems requiring high-static-pressure capability or a high-efficiency motor. Builders needing a different voltage, three-phase supply or higher pressure rating should look at other models.
115 V AC single-phase nameplate voltage
The motor is nameplated for 115 V AC single-phase operation only. This electrical characteristic determines whether the fan can be wired into the available supply without additional transformation or phase conversion.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $443.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dayton |
| Model name | 6KWK5 |
| Product type | Drain Components |
Questions about this item
What roof opening or curb size matches the 22 in square base of this 6KWK5 unit?
The fan sits on a 22 in by 22 in square base, so the roof curb or framed opening must accommodate those outside dimensions and be rated for the fan weight.
Will the 115 V single-phase motor start reliably on an older 15 A branch circuit shared with other shop equipment?
The 1/6 hp motor draws modest current at 115 V AC, so a dedicated 15 A circuit is ample; on a shared circuit verify total load stays below the breaker rating.
How can I confirm the fan is delivering the rated 571 cfm once installed?
Measure airflow at the duct with a calibrated balometer or traverse probe; at zero static pressure the reading should be near 571 cfm.
More in Drain Stoppers, Strainers & Traps
Similar items
HAYWARD POOL PRODUCTS INC SV10050STE 120VAC PVC Solenoid Valve Trap 1/2 in
- Drain Components
- HAWA
Flint & Walling 135627 Booster Cartridge 11 Stages
- Drain Components
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
Dynaquip Controls 1/2" FNPT Stainless Steel Electronic Ball Valve 12V 24V IP66
- HAWA
- Transparent





