Dayton 6XH50 Split Phase HVAC Control 1/3HP 1725rpm
Split-phase motor drives fans and blowers at 1725 rpm with 1/3 hp from 115 V AC
- Split-phase design starts reliably on 115 V single-phase power
- 1/3 hp output drives fans and blowers in HVAC systems
- 1725 rpm speed matches common belt-drive applications
- Open drip-proof enclosure resists moisture and debris
- C-face 56CZ frame mounts directly to standard equipment
Dayton 6XH50 Split Phase Motor 1/3 HP
The Dayton 6XH50 is a single-phase split-phase motor rated at 1/3 horsepower with a nameplate speed of 1725 rpm. It operates on 115V AC at 60 Hz and draws 5.8 amps at full load. The open drip-proof enclosure and steel frame suit general-purpose indoor installations.
Installers needing a C-face 56CZ frame replacement
This motor fits equipment that calls for a 56CZ C-face mounting with a 2 7/16 inch shaft length and continuous duty cycle. It is not for applications that require thermal overload protection, a totally enclosed enclosure, or a different frame size or shaft dimension.
115V AC split-phase 1/3 HP at 1725 rpm
The critical specification is the 115V AC split-phase design delivering 1/3 hp at 1725 rpm in a 56CZ C-face frame. Matching voltage, phase, horsepower, speed and frame ensures the motor will couple and perform as the original equipment specifies.
How it compares
Measured against everything we stock in Heating & Cooling Controllers, at today’s prices. Recalculated every night.
- Price $249.99
- Pricier than about 87% of the 1,762 comparable items (median $45.99).
Specifications
| Product | |
|---|---|
| Brand name | DAYTON |
Questions about this item
How much heat and noise should I expect from the 1/3 HP split-phase motor running continuously at 1725 rpm?
The open drip-proof enclosure and Class B insulation handle a maximum ambient temperature of 40 °C, while the 1.35 service factor gives the motor headroom for continuous duty without overheating.
What voltage supply and mounting arrangement must I already have to install this 56CZ frame motor?
It requires a 115 V AC single-phase supply and a C-face mounting surface that accepts the 56CZ frame with a 2 7/16 in shaft length.
Will the reversible CW/CCW rotation work with my existing belt-drive blower that turns one fixed direction?
Yes, the motor shaft rotation is configurable for clockwise or counter-clockwise operation to match your current blower direction.
More in Heating & Cooling Controllers
