We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow speaker enclosure with dual 10-in woofer cutouts, tweeter and horn openings, quad ports, carpet finish

Deejay LED

Deejay LED D10T2H1YELLOW 10-in Woofer Horn Enclosure Yellow

SKU CH-EF41-YJ4NG

Empty speaker enclosure for two 10-in woofers, two tweeters and one horn with quad ports

  • Built for two 10-in woofers with 9.125-in cutouts
  • Twin tweeter mounts use 95mm openings for precise fit
  • Single 145mm horn aperture directs high frequencies cleanly
  • Two quad ports load each woofer chamber independently
  • 12mm plywood shell and carpet finish withstand heavy use

Empty Enclosure for Custom Builds

The Deejay LED D10T2H1YELLOW is an unfinished speaker cabinet designed for audio enthusiasts who want to assemble their own system. It provides the structural housing for two 10-inch woofers, two tweeters and a single horn driver. The yellow carpet finish and embroidered logo give the box a finished appearance before any drivers are installed.

12mm Plywood Construction and Ported Chambers

Built from 12mm plywood, the enclosure separates the drivers into three sealed chambers. Each woofer receives its own quad port, with a mounting depth of 6.625 inches and round cutouts measuring 9.125 inches. The rigid panels and internal bracing are intended to minimise panel resonance during high-output playback.

Pre-Cut Openings for Driver Installation

The front baffle arrives with two 95mm tweeter holes and one 145mm horn opening already cut, eliminating the need for specialised routing tools. Buyers who require different driver sizes or additional midrange cutouts will need to modify the cabinet themselves. No drivers, crossover components or wiring are included with the enclosure.

How it compares

Measured against everything we stock in Tech Gadgets & Accessories, at today’s prices. Recalculated every night.

Price $127.99
Pricier than about 90% of the 5,998 comparable items (median $24.99).

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the 10-in woofers into the 9.125-in round openings without air leaks?

Use the supplied cut-out as a template, apply a continuous bead of speaker gasket tape around each 9.125-in hole, then bolt the woofers down evenly in a criss-cross pattern so the 12 mm plywood baffle stays flat.

What parts will need replacement first if I run this enclosure daily at high output?

The surround foam on the two 10-in woofers and the diaphragms in the two 95 mm tweeter openings typically fatigue before the 12 mm plywood box or the 145 mm horn mouth.

At what point does the quad-port tuning limit sustained SPL before the drivers hit Xmax?

The two quad ports are sized for the internal chamber volume; once port air velocity exceeds roughly 10 % of the speed of sound, compression rises sharply and the 6.625-in mounting depth stops the woofers from moving further.

More in Tech Gadgets & Accessories

Similar items