Defendwe SATA Power Cable 15 Pin to 6 Pin 20cm
Converts a 15-pin SATA power connector to a 6-pin PCIe plug for graphics cards using 18-gauge copper wire over 20 cm
- Connection typeMicro USB to USB A
- Plug-and-play convenience with 15-pin SATA to 6-pin PCIe conversion
- 20 cm cable keeps builds tidy inside compact cases
- 18 AWG copper conductors deliver reliable power to graphics cards
- Lightweight design simplifies routing without adding strain on connectors
- New condition ensures clean contacts and factory-spec performance
Power Adapter for Graphics Cards
This 20 cm cable converts a 15-pin SATA power connector into a 6-pin PCIe plug. It lets a standard power supply feed a graphics card that needs dedicated PCIe power. The 18 AWG copper conductors carry the required current without extra adapters. Plug-and-play design means no software or configuration is needed.
Suited for Simple GPU Upgrades
Builders adding a mid-range card to a system with spare SATA power leads can use this adapter. It is not for installations that demand multiple 6-pin or 8-pin connectors from a single rail. Users whose power supply already provides native PCIe cables should use those instead. The short length only fits components placed close to the drive bay area.
15-Pin SATA to 6-Pin PCIe Conversion
The single specification that decides fit is the connector pairing: a 15-pin SATA power female end and a 6-pin PCIe power male end. If the graphics card requires an 8-pin connector or the power supply lacks a free SATA plug, this cable will not work. Verify both connector types before purchase.
How it compares
Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.
- Price $16.99
- Pricier than about 60% of the 15,227 comparable items (median $14.99).
Specifications
| Ports & slots | |
|---|---|
| Connection type | Micro USB to USB A |
Questions about this item
Will the 20 cm cable add noticeable heat or power loss when running all day?
The 18 copper wire construction keeps resistance low so the short 20 cm run stays cool and delivers full power continuously.
What must already be in the PC for this adapter to work?
A free 15-pin SATA power connector from the power supply and a graphics card that requires a 6-pin PCIe power input.
Can I use this with an older power supply that only has 4-pin Molex connectors?
No, the adapter needs a 15-pin SATA power source; a Molex-to-SATA adapter would be required first.
More in USB Cords & Extension Cables
Similar items
Jansicotek PQ003 USB4 cable 5 ft 240W 40Gbps 8K@60Hz
- USB C to USB C
- USB4
STARTECH UUSBHAUB6LA USB 2.0 A to Left Angle Micro USB B Cable
- USB A to Micro USB
- USB 2.0
Vszerda USB-C to Mini DisplayPort adapter 4K 2K 60Hz
- USB Type C
- USB Type C
STARTECH USB3SEXT1M USB 3.0 extension cable 3.28 ft
- USB A to USB A
- Data Transfer Cable





