Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 600 GB enterprise hard drive spinning at 15,000 RPM with a SAS 12 Gb/s interface in a 3.5-inch form factor
This 600GB 3.5 inch internal hard drive spins at 15000 RPM and connects through a SAS 12Gb/s interface. It uses SLC NAND flash memory as part of a hybrid design built for enterprise storage workloads. The bare drive arrives without a caddy or mounting hardware.
Database clusters, virtualization hosts and tier-zero storage tiers benefit from the spindle speed and SAS bandwidth. Systems limited to slower rotational speeds or different interfaces cannot use this drive. Builders who need larger capacities or non-SAS connectivity should look elsewhere.
The drive requires a backplane or controller that supports SAS 12Gb/s signalling and a 3.5 inch bay. Without that interface the drive will not function, regardless of capacity or RPM. Verify the host connector before purchase.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL ENTERPRISE ACCESSORIES |
| Model name | 400-AJRC |
| Total capacity | 600 GB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 15,000 RPM |
| Mean latency | 12Gb/s |
| Storage | |
| Flash memory type | SLC |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 1.36 kg |
| Package size | 305 × 229 × 102 mm |
Yes, the drive uses a standard 3.5 inch form factor designed for 3.5 inch drive bays in compatible Dell 13G servers and enclosures.
Insert the bare drive into the hot-swap carrier until it clicks, then slide the carrier into the bay until the latch engages; the step often missed is securing the carrier latch fully.
Enterprise drives are rated for continuous operation; replacement timing depends on workload intensity and SMART monitoring alerts rather than a fixed interval.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?