Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4 TB SAS hard drive with a 12 Gb/s interface, 7200 RPM speed and 3.5 inch form factor
This Dell 400-ALNY kit provides a 4TB 3.5-inch hard drive with a SAS 12Gb/s interface spinning at 7200 RPM. It is built for desktop or server chassis that accept 3.5-inch SAS drives and includes the carrier required for Dell systems. The drive delivers high-capacity sequential storage for bulk data workloads. Condition is new.
This drive suits administrators expanding storage pools, backup targets or media archives where large sequential throughput matters more than random access speed. It is not for workloads that demand low latency or high random IOPS; those remain better served by faster-spinning drives or flash media. Systems without a SAS backplane or controller cannot use this drive.
The single specification that decides fit is the SAS 12Gb/s interface. Your host bus adapter, backplane or RAID controller must support 12Gb/s SAS to realise the rated transfer rate; a 6Gb/s-only controller will limit performance. Verify that your chassis accepts a 3.5-inch drive with the supplied carrier before ordering.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Total capacity | 4 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Ports & slots | |
| Interface type | SAS 12Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
This kit is supplied only as a 4 TB drive. If you need more or less storage, you would have to select a different part number.
The 7200 RPM spindle speed gives faster sequential throughput and lower latency than slower nearline drives, so large file copies and database scans complete more quickly.
The 12 Gb/s SAS link provides up to 12 Gbit/s bandwidth to the controller; actual sustained transfer is limited by the 7200 RPM mechanical performance of the drive itself.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?