We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 3.5 inch bare SATA hard drive with circuit board visible

DELL

DELL 400-ANPB 8TB 3.5" SATA 7200 RPM internal hard drive

SKU CH-VKYW-HFAAE

An 8 TB 3.5" SATA 7200 RPM internal hard drive with a 6.0 Gb/s interface and hot-swap support for Dell PowerEdge servers

  • Total capacity8 TB
  • Interface typeSATA 6.0Gb/s
  • Form factor3.5 in (8.89 cm)
  • Packaging typeBare Drive
  • Rotational speed7,200 RPM
  • Mean latency6Gb/s
  • 8 TB capacity stores large datasets
  • 7200 RPM spindle speed delivers responsive throughput
  • SATA 6.0 Gb/s interface supports high bandwidth
  • 5 inch form factor fits standard bays
  • Hot-swappable design enables drive changes without downtime

Dell 400-ANPB 8TB 3.5" SATA Drive

The Dell 400-ANPB is a new 8TB internal hard drive built for desktop and server storage. It uses a 3.5 inch form factor and connects through a SATA 6.0Gb/s interface. The drive spins at 7200 RPM for responsive data access. It arrives as a bare drive without retail packaging or cables.

Suited for capacity-focused storage in Dell

This drive fits administrators who need 8TB of hot-swappable storage inside compatible Dell PowerEdge systems. The 7200 RPM spindle speed supports general-purpose workloads and bulk data retention. Builders using non-Dell chassis or controllers should verify tray and firmware compatibility first. Users who require solid-state speed or smaller 2.5 inch form factors should consider other drive types.

Hot-swappable 3.5" SATA interface for PowerEdge bays

The drive uses a standard SATA 6.0Gb/s connection and is specified as hot-swappable for supported Dell PowerEdge servers. This allows drive replacement without powering down the system when the chassis and backplane support the feature. Confirm that your server model lists the 400-ANPB part number before installation. The bare-drive packaging means mounting hardware is not included.

How it compares

Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.

Price $415.99
Pricier than about 90% of the 4,938 comparable items (median $107.99).
Total capacity 8 TB
Higher than about 80% of the 2,372 comparable items (median 2 TB).
Price per TB $52.00 per TB
Cheaper than about 59% of the 2,365 comparable items (median $62.21 per TB).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDell
Model name400-ANPB
Total capacity8 TB
Performance
Rotational speed7,200 RPM
Mean latency6Gb/s
Ports & slots
Interface typeSATA 6.0Gb/s
Size & build
Form factor3.5 in (8.89 cm)

Questions about this item

Does the Dell 400-ANPB 8TB 3.5" SATA drive ship with mounting screws, cables, or a tray, or must they be purchased separately?

The unit is supplied as a bare drive only; mounting hardware, SATA data and power cables, and any server-specific tray are not included and must be sourced separately.

Should I choose the 7.2K 6Gb/s version or a different spindle speed for a Dell PowerEdge server?

This model is the 7200 RPM 6Gb/s SATA variant; select it when the server bay and controller support 3.5" hot-swap SATA drives and the workload suits 7.2K performance.

What does the 6.0Gb/s SATA interface mean for actual throughput once the drive is installed in a PowerEdge server?

The 6.0Gb/s link caps burst transfer at 600 MB/s; sustained sequential reads and writes will be lower and are limited by the 7200 RPM mechanical speed.

More in 3.5-Inch Internal Desktop HDDs

Similar items