Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.2 TB enterprise SAS drive spinning at 10000 RPM with a 12 Gb/s transfer rate and hot-swap tray for 2.5-inch bays
The Dell 6WCT7 is a 1.2TB internal hard drive built for enterprise storage arrays and servers. It uses a 2.5-inch form factor with a SAS interface running at 12Gb/s. A spindle speed of 10000 RPM supports demanding read and write workloads. The bare drive ships without a tray and is supplied in new condition.
This drive fits 2.5-inch hot-swap bays in Dell PowerEdge and compatible chassis. It serves databases, virtualisation hosts and transaction-heavy applications that benefit from 10K RPM latency. Systems limited to 6Gb/s SAS backplanes will operate at the lower link rate. Buyers needing larger capacity per spindle or solid-state endurance should evaluate alternative media.
The single specification that decides fitment is the 12Gb/s SAS interface. The drive requires a controller or backplane that supports this signalling rate to achieve full throughput. A 6Gb/s-only host will limit performance to the slower speed. Verify the host bus adapter and backplane generation before purchase.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | 6WCT7 |
| Total capacity | 1.2 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 10,000 RPM |
| Mean latency | 6Gb/s |
| Ports & slots | |
| Interface type | SAS 6Gb/s |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
Yes, the 1.2TB capacity and 10000 RPM suit enterprise storage workloads needing fast sequential and random access.
The drive supports 12Gb/s SAS signalling, but the specification lists the interface at 6Gb/s, so real-world throughput caps at the lower link speed.
The drive uses a SAS interface rated at 6Gb/s; the 12Gb/s figure is the drive's maximum transfer rate, but the host link limits sustained throughput to 6Gb/s.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?