Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1 TB 3.5-inch desktop hard drive with a 7200 RPM spindle and SATA 6.0Gb/s interface supporting hot-swap installation
This 1 TB hard drive spins at 7200 RPM and connects through a SATA 6.0Gb/s interface. It uses a 3.5 inch form factor with hot-swap support for desktop systems. The drive is supplied new and packing may vary between retail and OEM.
The spindle maintains 7200 RPM continuously rather than only in short bursts. This steady rotation keeps sequential throughput stable during long writes or backups. Heat output remains consistent under load because the motor speed does not throttle. The SATA 6.0Gb/s link sustains the data rate without protocol overhead changes.
The SATA 6.0Gb/s interface caps maximum transfer at the bus limit, so the drive cannot exceed that bandwidth. Mechanical latency and the 7200 RPM spindle set the practical floor for random access. Hot-swap capability depends on the host backplane supporting the SATA hot-plug specification. The 3.5 inch form factor requires a matching drive bay or tray.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Total capacity | 1 TB |
| Performance | |
| Rotational speed | 7,200 RPM |
| Ports & slots | |
| Interface type | SATA 6.0Gb/s |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
The 7200 RPM spindle generates typical mechanical hard-drive noise and warmth; ensure your case airflow can move air across the 3.5" chassis.
You need a 3.5" hot-swap bay or cage with a SATA 6.0Gb/s backplane and matching power connectors.
Yes, the SATA 6.0Gb/s interface negotiates down to 3 Gb/s, so the 1TB drive remains usable on legacy ports.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?