Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.2TB 2.5" SAS drive spinning at 10000 RPM with a 12Gb/s transfer rate for high-speed enterprise storage
The Dell GT7MT is a 1.2TB 2.5-inch internal hard drive that spins at 10000 RPM and connects through a SAS interface. It is built for desktop systems and servers that require high-speed mechanical storage in a small form factor. The drive arrives as a bare unit without a tray or bracket. Its 12Gb/s transfer rate supports demanding read and write workloads.
This drive fits 2.5-inch SAS drive bays that can handle 10000 RPM operation and a 12Gb/s link. Systems limited to slower SAS speeds or smaller capacities will not use the full performance. Buyers who need a larger capacity, a different physical size, or a non-SAS interface should look elsewhere. The bare drive packaging means a compatible carrier is required for installation.
The single specification that determines fit is the 12Gb/s SAS interface. The host controller and backplane must support this exact protocol and speed for the drive to operate correctly. A mismatched interface will prevent the drive from being recognised or limit it to a lower transfer rate. Verify the system documentation for SAS 12Gb/s support before purchase.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | GT7MT |
| Total capacity | 1.2 TB |
| Performance | |
| Rotational speed | 10,000 RPM |
| Mean latency | 6Gb/s |
| Ports & slots | |
| Interface type | SAS 6Gb/s |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
Yes, the drive is backward compatible with 6Gb/s SAS controllers, though it will run at the lower 6Gb/s transfer rate instead of its maximum 12Gb/s speed.
Check the drive's reported RPM and SAS link speed in your RAID controller BIOS or OS disk utility; they should show 10000 RPM and a negotiated 12Gb/s or 6Gb/s link depending on your controller.
No, the drive ships as a bare 2.5" unit without a tray; you must supply a compatible Dell 2.5" drive caddy or tray separately.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?