DELL Inspiron 5368 5378 13.3" Touchscreen LCD Ribbon Cable MCPF0 laptop replacement part
Genuine Dell MCPF0 touchscreen LCD ribbon cable restores full touch and display function on 13.3" Inspiron 5368 and 5378 models
- Compatible brandsFor Dell
- Supported modelsFor Dell Inspiron 5368, Inspiron 5378 (13.3 in Touchscreen M
- Product dimensions8.7 in × 0.2 in × 0.01 in (Length × Width × Height)
- Product weight0.02 lb (0.01 kg)
- Genuine Dell MCPF0 part ensures exact compatibility with Inspiron 5368 and 5378 touchscreens
- Precision-engineered pin layout and 8.7" length match original factory specifications for 13.3" displays
- Shielded flexible construction resists wear and signal interference during daily hinge movement
- Restores full touch responsiveness and eliminates flickering or dead zones on the display
- Ultra-slim .01" profile and .02 lbs weight add no bulk during reassembly
Genuine Dell LCD Flex Cable for 13.3" Touchscreens
This Dell MCPF0 ribbon cable is a direct OEM replacement for the touchscreen display assembly on Inspiron 5368 and 5378 laptops. It carries the critical signal path between the touch panel and the motherboard. The part is engineered to Dell's exact pin configuration and length specifications for these specific models. It restores full touch responsiveness and display integrity when the original cable fails.
Sustained Signal Integrity Under Daily Flexing
The shielded, flexible construction is built to withstand the repeated bending cycles inherent in a 2-in-1 hinge mechanism without signal degradation. It maintains high-signal integrity for crisp touch response and artefact-free video output over the laptop's operational lifespan. The lightweight design at 0.02 lbs adds negligible mass to the display lid assembly. Durability is focused on long-term resistance to wear and electromagnetic interference.
Verify Exact Model and Screen Type Before Ordering
Confirm your laptop is an Inspiron 5368 or 5378 equipped with a 13.3 inch touchscreen display, as this cable is not compatible with non-touch variants or other screen sizes. The physical dimensions are 8.7 x 0.2 x 0.01 inches, so check the routing path and connector orientation inside the chassis. Installation requires technical disassembly skill to access the display hinge area safely.
How it compares
Measured against everything we stock in Laptop Repair Parts, at today’s prices. Recalculated every night.
- Price $6.99
- Cheaper than about 94% of the 1,151 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | Dell |
| Part number | MCPF0 |
| Size & build | |
| Product dimensions | 8.7 in × 0.2 in × 0.01 in (Length × Width × Height) |
| Product weight | 0.02 lb (0.01 kg) |
| Compatibility | |
| Compatible brands | For Dell |
| Supported models | For Dell Inspiron 5368, Inspiron 5378 (13.3 in Touchscreen Models) |
Questions about this item
Does the MCPF0 ribbon cable draw any power or generate heat when the laptop runs all day?
The MCPF0 is a passive flex cable with no active components, so it consumes no power and produces no measurable heat during continuous use.
What must I already have inside the laptop for this MCPF0 cable to connect and work?
You need a Dell Inspiron 5368 or 5378 with a 13.3" touchscreen display, an intact motherboard connector, and the original hinge brackets to route the 8.7" cable correctly.
Will the MCPF0 cable fit if I keep the original 13.3" touchscreen panel and motherboard from my 5368?
Yes — the MCPF0 matches the exact pin layout and 8.7" length specified for the 5368 and 5378 touchscreen models, so it plugs directly into the existing panel and board.
More in Laptop Repair Parts
Similar items
Neato Robotics 290-0056 Bumper Bump Switch Set Board for Botvac D3 D4 D5 D6
- Neato
- Botvac D3, D4, D5,…





