DELL PowerEdge M640 Blade Server 2x Xeon Gold 6230 20C 16GB DDR4 2x 1.92TB SSD H330 57810S-K iDRAC9 Enterprise
- Xeon
- 2.1 GHz
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Dual 20-core Xeon Gold 6230 blade server with 32GB DDR4 and two 1.92TB SATA SSDs
Installed Memory Size 32GB
SSD (Installed) 2 x 1.92TB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for dense compute workloads such as virtualisation, private cloud and high-performance computing. Two Intel Xeon Gold 6230 processors deliver 20 cores each at 2.1 GHz with 3.9 GHz turbo. 32 GB of DDR4 2666 MHz registered ECC memory is installed across 16 slots.
Suits teams that need high core density in a shared chassis with 10 Gb dual-port networking and iDRAC9 Enterprise management. Not suited for buyers who need GPU acceleration, local NVMe boot drives, or a standalone tower or rackmount form factor.
The server ships with two 20-core Intel Xeon Gold 6230 processors, giving 40 cores total in a single blade. This core count determines whether the node meets the licensing or throughput targets of the intended workload.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge M640 |
| Product type | Blade |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 20-Core Processor |
| Processor socket | LGA 3647 |
| Processor speed | 2.1 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 32 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 2 TB |
| Memory slot count | 16 |
| Storage | |
| Installed SSD | 2 × 1.92 TB SATA SSD |
| Disk controller | Dell Perc S140 Controller |
| Drive interface | SATA/SAS |
| Supported RAID levels | RAID 0/1/5/10 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Ports & slots | |
| Management interface | RJ 45 |
| Size & build | |
| Rack height | Blade |
| Software | |
| Operating system | No |
Other versions of this model
Each of the 20 cores per processor can reach 3.9 GHz for short bursts, but sustained all-core speeds will drop toward the 2.1 GHz base under heavy multi-threaded workloads.
The S140 handles SATA at 6 Gb/s and provides RAID 0, 1, 5, 10, but does not support NVMe, so the drives run at SATA speeds with software-assisted RAID.
It fits one half-height bay in a PowerEdge MX or M1000e chassis and uses the 2.5-inch drive form factor for its two installed SSDs.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?