We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

Dell PowerEdge R540 2U rack server 2x Xeon Silver 4114 2.2GHz 10-core 64GB DDR4 8x 8TB SAS HBA330

SKU CH-GXYQ-M3EBH

2U rack server with dual 10-core Xeon Silver 4114 CPUs, 64GB DDR4 ECC memory, eight 8TB 7.2K SAS drives on an HBA330 controller, dual 1GbE networking, iDRAC9 Enterprise, and redundant 750W PSUs

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Installed SSDNo
  • Processor core count10-Core Processor
  • Operating systemNo
  • Type of memoryDDR4
  • Dual Xeon Silver 4114 CPUs deliver 20 cores at 2.2 GHz base
  • 64 GB DDR4 2666 MHz ECC memory supports virtualization workloads
  • Eight 8 TB 7.2K SAS drives provide 64 TB raw capacity
  • HBA330 12 Gb/s controller enables direct JBOD pass-through
  • iDRAC9 Enterprise gives full remote management with 2× 750 W Platinum PSUs

Dual Xeon 10-core 2U server

The Dell PowerEdge R540 is a 2U rack server equipped with two Intel Xeon Silver 4114 processors, each running at 2.2 GHz with ten cores. It ships with 64 GB of DDR4 registered ECC memory across four modules and a PERC HBA330 storage controller in pass-through mode. Eight 3.5-inch 8 TB SAS hard drives spinning at 7.2K RPM fill the front bays, and dual 750 W platinum power supplies provide redundancy. iDRAC9 Enterprise enables full remote management.

Storage-dense virtualization host

This configuration suits organisations that need high raw capacity in a compact 2U form factor for virtualisation, file serving, or database workloads. The pass-through HBA330 presents drives directly to the operating system, so software-defined storage or ZFS can manage redundancy. Buyers who require hardware RAID with cache-backed write acceleration should consider a server fitted with a PERC RAID controller instead.

HBA330 pass-through and iDRAC9 Enterprise

The HBA330 controller exposes all eight SAS or SATA drives without abstraction, letting the OS handle mirroring, parity or tiering. iDRAC9 Enterprise adds a dedicated management port, virtual console, automated deployment scripts and full power-cycle control from anywhere. Together they remove the need for a separate KVM or out-of-band appliance and simplify large-scale firmware updates across a rack.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,018.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Processor core count 10-Core Processor
Lower than about 85% of the 7,955 comparable items (median 16).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameR540
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count10-Core Processor
Processor socketLGA 3647
Processor speed2.2 GHz
Processor detailsSilver 4114
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1 TB
Memory slot count16
Storage
Installed SSDNo
Installed storage8 × 8 TB 7.2K SAS
Disk controllerDell Perc HBA330 Controller
Drive interfaceSAS
Supported RAID levelsNone
Connectivity
Network controller1x Dell EMC Integrated Dual Port Network Daughter Card - 2x 1 Gigabit RJ45 Ports,
Ports & slots
Network ports2 x Ports
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo
More details
Management controllerDell EMC 14G PowerEdge iDRAC 9 Enterprise License

Questions about this item

What rack hardware must I already have to install this 2U server?

The server includes rails and a bezel for mounting in a standard rack cabinet.

Will the installed PERC HBA330 controller work with my existing SATA drives?

The HBA330 supports both SAS and SATA drives in pass-through mode for direct drive access.

How can I verify the dual Xeon Silver 4114 processors are running at their 2.2 GHz base speed after setup?

Check CPU frequency in the iDRAC 9 Enterprise interface or the system BIOS during boot.

More in Rack & Tower Servers

Similar items