DELL PowerEdge R630 10-bay rack server E5-2650 V3 2.3GHz 24GB DDR4 H730

Compact 1U rack server for virtualisation

The PowerEdge R630 fits ten 2.5-inch hot-plug bays into a single rack unit, making it suitable for dense virtualisation clusters or database nodes that need local storage without consuming extra rack space. A single Xeon E5-2650 V3 provides ten cores at 2.3 GHz with twenty threads, while 24 GB of DDR4 across the 24 DIMM slots gives a starting point for memory-hungry workloads. The PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50 and 60 for flexible data protection.

Sustained load behaviour with redundant power

Dual 750 W hot-swap power supplies share the load so the server remains online if one unit fails or is replaced during operation. The 1U chassis uses high-speed fans that ramp with inlet temperature, keeping the CPU and memory within thermal limits during continuous multi-threaded jobs. PCIe 3.0 slots and the dedicated PERC slot stay powered without throttling, allowing add-in cards such as 10 GbE adapters to maintain line-rate throughput over long periods.

Compatibility checks before ordering

Verify that your rack provides at least 26.8 inches of depth and 17.44 inches of width for the chassis rails. Confirm the facility can deliver two independent 750 W circuits for full redundancy. Ensure any 2.5-inch SAS or SATA drives you plan to install match the H730’s supported RAID levels and do not exceed the 14 TB per drive limit. Remember that no operating system, drive trays or drives are included, so budget for those separately.