DELL PowerEdge R630 10SFF 2× Xeon E5-2650L v4 1.7 GHz 384GB DDR4 No Drive

Dual 14-Core Xeon Server

The Dell PowerEdge R630 is a 1U rack server fitted with two Intel Xeon E5-2650L v4 processors running at 1.7 GHz. Each CPU provides 14 cores and 35 MB of cache. The system ships with 384 GB of DDR4 ECC registered memory installed across its DIMM slots. It is aimed at organisations that need dense compute and memory capacity in a single rack unit for virtualisation, database or high-performance workloads.

10-Bay 2.5-Inch Chassis Check

Verify that your rack can accommodate a 1U server measuring 36 by 24 by 10 inches and weighing 40 pounds. The front panel accepts up to ten 2.5-inch SATA or SAS drives; no drives are installed, so you must supply compatible media. A Dell PERC H730 SAS RAID controller is present, and the board includes an Intel I350/X540 network card delivering two 10 GbE and two 1 GbE ports. Dual 495 W power supplies are fitted for redundancy.

iDRAC8 Remote Management

Integrated iDRAC8 Enterprise provides out-of-band console access, power control and hardware monitoring over a dedicated management port. The ten drive bays free internal space for storage expansion without occupying PCIe slots. Two CPU sockets are already populated to the maximum of two, so no further processor upgrades are possible. Memory can be increased to 1.5 TB using additional DDR4 modules. The integrated graphics handles basic display output, leaving expansion slots available for specialised accelerators or additional networking.