We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R630 10SFF 2x Xeon E5-2670 v3 384GB DDR4

SKU CH-NZ7K-TXFAP

A 1U rack server with ten 2.5-inch drive bays, dual 12-core Xeon processors at 2.3GHz and 384GB DDR4 ECC memory

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.3 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual 12-core Xeon processors at 2.3GHz deliver high multi-threaded throughput
  • 384GB DDR4 ECC registered memory supports large virtualised workloads
  • Ten 2.5-inch SAS drive bays with PERC H730 RAID controller enable flexible storage arrays
  • Dual 10GbE and dual 1GbE network ports provide high-bandwidth connectivity
  • iDRAC8 Enterprise remote management simplifies lights-out server administration

Dell PowerEdge R630 10SFF dual Xeon server

The Dell PowerEdge R630 is a 1U rack server fitted with two Xeon E5-2670 v3 processors running at 2.3 GHz. It ships with 384 GB of DDR4 ECC registered memory and a PERC H730 SAS RAID controller. The 10-bay 2.5-inch chassis supports up to ten SAS drives, which are not included. Integrated graphics and iDRAC8 Enterprise remote management are provided.

Ideal for dense virtualisation

This configuration suits buyers who need high core counts and large memory capacity in a compact rack footprint. The dual 12-core CPUs and 1.5 TB maximum memory ceiling handle heavy multi-threaded applications. Buyers who require GPU acceleration, more than two processor sockets, or storage interfaces other than SAS should consider a different platform.

384 GB DDR4 ECC memory installed

The system arrives with 384 GB of DDR4 ECC registered RAM populated across the available DIMM slots. This amount determines how many virtual machines or in-memory databases can run simultaneously. The board supports up to 1.5 TB total, so additional modules can be added later if the workload grows.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,484.99
Cheaper than about 59% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.3 GHz
Typical for this category: the median of 9,950 items is 2.3 GHz.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Storage
Installed storage9,00
Disk controllerDell PERC H730 SAS Controller
Drive interfaceSAS
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC8 - Enterprise License

Questions about this item

Does the R630 chassis support the 2.5-inch SAS drives I already use?

The 10SFF chassis provides ten 2.5-inch bays with a SAS backplane driven by the PERC H730 controller, so existing 2.5-inch SAS drives install directly.

Can I keep my current DDR4 ECC registered modules when expanding memory?

Yes, the system uses DDR4 ECC registered DIMMs and supports up to 1.5TB total capacity across 24 slots.

How do I confirm the PERC H730 and iDRAC8 Enterprise are active after first boot?

Enter the PERC H730 BIOS (Ctrl+R) to see the controller and any configured arrays, then open the iDRAC8 web interface to verify the Enterprise licence status.

More in Rack & Tower Servers

Similar items