DELL PowerEdge R630 10SFF 2x Xeon E5-2680 v3 512GB DDR4

Dell PowerEdge R630 10-bay server

The Dell PowerEdge R630 is a 1U rack-mount server system equipped with two Intel Xeon E5-2680 v3 processors running at 2.5GHz. Each CPU provides 12 cores and 30MB cache, delivering 24 threads total for multi-threaded workloads. The chassis supports up to ten 2.5-inch drive bays connected to a PERC H730 SAS controller with SATA interface. Remote management is handled by iDRAC8 Enterprise license.

Suited for virtualisation hosts needing dense memory

This configuration ships with 512GB of DDR4 ECC registered memory installed and supports a maximum capacity of 1.5TB across its DIMM slots. Organisations running memory-intensive virtual machines or in-memory databases will benefit from the large installed capacity. Buyers who require pre-installed storage drives should look elsewhere because no drives are included in this unit. The integrated graphics and dual 495W power supplies support standard rack deployment without GPU acceleration.

512GB DDR4 ECC registered memory installed

The single specification that determines fit is the 512GB DDR4 ECC registered memory configuration already populated in the system. This memory type is not interchangeable with other DDR generations and must match for any future expansion up to the 1.5TB limit. The PERC H730 RAID controller manages the ten SATA drive bays for storage flexibility. Dual 10GbE and 1GbE network ports provide connectivity for clustered workloads.