We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R650 rack server 2x Xeon Silver 4310 2.1GHz 12-core 512GB DDR4 H755 10x 2.5" 1U

SKU CH-SEEV-MEKNK

1U rack server with dual 12-core Xeon Silver 4310 CPUs, 512 GB DDR4, PERC H755 RAID, ten 2.5-inch drive bays and dual 1400 W PSUs

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Video RAM8 MB
  • Processor core count12-Core Processor
  • Operating systemNo
  • Type of memoryDDR4
  • Dual Xeon Silver 4310 processors provide 12 cores each at 2.1 GHz base
  • 512 GB DDR4 2666 MHz ECC memory installed across 16 slots
  • H755 RAID controller supports RAID 0, 1, 5, 6, 10, 50, 60 with 8 GB NV cache
  • 10 front 2.5 inch SAS/SATA drive bays for flexible storage
  • iDRAC 9 Enterprise plus quad-port 1 GbE OCP 3.0 card for remote management and connectivity

PowerEdge R650 dual-socket 1U server

The Dell PowerEdge R650 is a 1U rack server built for dense compute environments. Two Intel Xeon Silver 4310 processors run at 2.1 GHz with a 3.3 GHz turbo frequency. The system ships with 512 GB of DDR4 2666 MHz registered ECC memory across 16 DIMM slots.

Virtualisation and database hosts.

This configuration suits virtualisation clusters, database workloads and private cloud deployments that need high core counts in a single rack unit. Buyers who require GPU acceleration for AI training or workloads needing more than 10 drive bays should look at larger chassis or GPU-optimised platforms.

PERC H755 RAID controller with 8 GB NV cache

The Dell PERC H755 PCIe controller provides hardware RAID 0, 1, 5, 6, 10, 50 and 60 with 8 GB of non-volatile cache backed by a battery. It manages up to ten 2.5-inch SAS or SATA drives installed in the front trays.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $6,667.99
Pricier than about 82% of the 17,641 comparable items (median $1,910.99).
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R650
Model nameR650
Part number2.1 GHz
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count12-Core Processor
Processor socketLGA 4189
Processor speed32
Installed CPUsSilver 4310
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity2 TB
Storage
Disk controllerDell Perc H755 Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Optical drive0
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell EMC 15G Broadcom 5720 Quad Port 1GbE OCP 3.0 Network Card
Ports & slots
Network ports4 x Ports
Expansion card slots0
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height1U
Software
Operating systemNo
More details
AI capabilityNo

Questions about this item

What PCIe generation does the PERC H755 controller use and what throughput does that limit the RAID array to?

The Dell PERC H755 controller connects via PCIe and provides 8 GB of NV cache with battery backup, supporting RAID 0, 1, 5, 6, 10, 50 and 60 for the installed drives.

What physical mounting hardware comes with the 1U chassis for rack installation?

Ready Rails and a front bezel are included with the server for rack mounting.

What steps are required to configure the H755 RAID controller before the operating system sees the virtual disks?

Enter the controller BIOS during POST, create a virtual disk with the desired RAID level, initialise it, then install the OS using the appropriate PERC driver.

More in Rack & Tower Servers

Similar items