We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U 8-Bay 2x Xeon E5-2683 v3 2.0GHz 14-Core 512GB DDR4 H730 8x 300GB SAS

SKU CH-K3SX-MYSXB

2U rack server with dual 14-core Xeon E5-2683 v3 CPUs, 512GB DDR4 ECC memory, PERC H730 RAID controller and eight 300GB 10K SAS drives

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count14-Core Processor
  • Dual 14-core Xeon processors deliver 28 total cores for parallel workloads
  • 512GB DDR4 registered ECC memory supports large virtualisation clusters
  • PERC H730 controller enables RAID 0/1/5/6/10/50/60 with battery-backed cache
  • Eight 300GB 10K SAS drives provide fast redundant storage in 2.5-inch bays
  • Dual 750W platinum power supplies with hot-swap redundancy keep the system running

Dual 14-Core Xeon Server

The PowerEdge R730 is a 2U rack server equipped with two Intel Xeon E5-2683 v3 processors, each running at 2.0 GHz with 14 cores. It ships with 512 GB of DDR4 registered ECC memory installed across 16 modules. The system targets midsize and large enterprises running data warehouses, e-commerce platforms, VDI, databases or high-performance computing workloads.

Verify Rack Space and Power

Before ordering, confirm that your rack can accommodate a 2U chassis and that you have redundant hot-swap power connections for the two 750-watt platinum supplies. The motherboard uses LGA 2011-3 sockets and the Intel C610 chipset with 24 DDR4 slots, so any future memory expansion must use registered ECC DDR4 modules. Network connectivity relies on an X520/I350 daughter card providing two 1 GbE and two 10 Gb SFP+ ports, so check that your switch supports SFP+ transceivers.

PERC H730 and iDRAC8 Enterprise

The bundled PERC H730 controller with 1 GB cache enables RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes across the eight 300 GB 10 K SAS drives. iDRAC8 Enterprise provides full remote management including virtual console, power control and hardware monitoring without requiring an operating system. Ready Rails and the front bezel are included for immediate rack mounting.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,871.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

What components are included with the server and what must be purchased separately?

The system ships with two Xeon E5-2683 v3 processors, 512GB DDR4 memory across 16 modules, a PERC H730 controller, eight 300GB SAS drives, a quad-port X520/I350 network card, iDRAC8 Enterprise, two 750W power supplies, rails and bezel. Additional drives or memory can be added.

Which memory capacity should I choose for this R730?

512GB is installed using 16 of the 24 DDR4 slots. You can expand up to 1.5TB by filling the remaining eight slots with compatible registered ECC modules.

What does the 2.0GHz base clock mean for actual performance?

Each of the 28 cores runs at 2.0GHz base with a 3.0GHz turbo frequency, delivering high multi-threaded throughput for virtualization, databases and compute-intensive workloads.

More in Rack & Tower Servers

Similar items