We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U rack server 2× Xeon E5-2699 v3 2.3GHz 18-core 256GB DDR4 8× 800GB SSD H730

SKU CH-PWHE-CJC9A

2U rack server with dual 18-core Xeon processors, 256GB DDR4 ECC memory and eight 800GB SATA SSDs on a PERC H730 RAID controller

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSD8 × 800 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count18-Core Processor
  • Dual Xeon E5-2699 v3 provide 18 cores each at 2.3 GHz base
  • 256 GB DDR4 2133 MHz ECC registered memory across 24 slots
  • PERC H730 1 GB controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • Eight 800 GB SATA SSDs deliver fast read performance
  • iDRAC8 Enterprise enables remote management with dual 750 W platinum PSUs

Dual Xeon E5-2699 v3 2U server

The Dell PowerEdge R730 is a 2U rack server equipped with two Intel Xeon E5-2699 v3 processors. Each CPU delivers 18 cores at 2.3 GHz with a 3.6 GHz turbo frequency. The system includes 256 GB of DDR4 registered ECC memory across 24 slots. It targets enterprises running virtualisation, databases or high-performance computing workloads.

12 Gb/s SAS controller with eight SATA SSDs

Storage is handled by a PERC H730 controller with 1 GB cache and battery backup. The controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Eight 800 GB SATA SSDs occupy the 2.5-inch drive bays. The SAS interface runs at 12 Gb/s while the installed drives use the 6 Gb/s SATA link speed.

Redundant 750 W power supplies

Two hot-swap 750 W platinum power supplies provide redundancy. The Intel X520/I350 daughter card adds two 1 GbE ports and two 10 Gb SFP+ ports. iDRAC 8 Enterprise enables remote management. Ready rails and a front bezel are included for rack mounting.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,326.99
Pricier than about 57% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count18-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD8 × 800 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

Should I choose the dual 18-core 2.3GHz Xeon E5-2699 v3 configuration or a different CPU option?

This unit comes with two Xeon E5-2699 v3 processors, each 18 cores at 2.3GHz with 3.6GHz turbo, filling both sockets; no other CPU option is offered for this listing.

What does 256GB DDR4 2133MHz mean for actual database or virtualization performance?

256GB of registered ECC DDR4 at 2133MHz provides high-capacity, error-corrected memory for large VM counts or in-memory databases, with 24 total slots allowing expansion to 1.5TB.

How does the PERC H730 12Gb/s SAS/SATA controller limit SSD throughput in practice?

The H730 1GB controller supports RAID 0/1/5/6/10/50/60 and pass-through at 12Gb/s SAS and 6Gb/s SATA, so the eight 800GB SATA SSDs run at SATA 6Gb/s speeds.

More in Rack & Tower Servers

Similar items