We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U rack server 2× Xeon E5-2699 v4 2.2GHz 22-core 256GB DDR4 2× 400GB SSD

SKU CH-KT26-G0637

Dual 22-core Xeon processors with 256GB DDR4 memory and dual 400GB SSDs in a 2U rack server

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count22-Core Processor
  • Dual 22-core Xeon processors handle heavy parallel workloads
  • 256GB DDR4 ECC memory supports large virtualised environments
  • PERC H730 controller enables RAID 0, 1, 5, 6, 10, 50, 60
  • Dual 10Gb SFP+ and 1GbE ports deliver high-throughput networking
  • Redundant 750W platinum power supplies maintain uptime during failures

Dual 22-core Xeon server

The Dell PowerEdge R730 is a 2U rack server built for midsize and large enterprises running data warehouses, e-commerce platforms, virtual desktop infrastructure or high-performance computing workloads. Two Intel Xeon E5-2699 v4 processors deliver 44 total cores at 2.2 GHz with 3.6 GHz turbo, supported by 256 GB of DDR4 registered ECC memory across 24 slots.

H730 controller and quad-port networking

A PERC H730 1 GB storage controller provides RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through for the eight 2.5-inch SATA bays, currently populated with two 400 GB enterprise SSDs. Dual 750 W platinum hot-swap power supplies and iDRAC8 Enterprise remote management keep the platform running and serviceable, while an Intel X520/I350 daughter card adds two 1 GbE and two 10 Gb SFP+ ports.

Upgrade from single-socket

This system replaces single-processor servers or dual-socket boxes limited to lower core counts and memory ceilings, lifting the RAM limit to 1.5 TB and doubling thread capacity for heavily virtualised or database-heavy environments. The jump is worth it when workloads exceed the compute or memory headroom of a single Xeon or when RAID flexibility and redundant power become operational requirements.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,355.99
Cheaper than about 63% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count22-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

What RAID levels does the PERC H730 controller support?

The PERC H730 supports RAID 0, 1, 5, 6, 10, 50, 60 and pass-through mode.

What rack space and rails are required to mount this 2U server?

It occupies 2U of rack height and includes Dell Ready Rails for mounting.

How is the iDRAC8 Enterprise remote management configured initially?

Connect the dedicated iDRAC network port, then access the web interface via its default IP to set credentials and network settings.

More in Rack & Tower Servers

Similar items