We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server with front bezel, eight 2.5-inch drive bays and dual power supplies

DELL

DELL PowerEdge R730 2U Rack Server 2x Xeon E5-2620 v3 2.4GHz 512GB DDR4 2x 400GB SSD

SKU CH-6JZ2-P26M3

A 2U rack server with dual Xeon processors, 512 GB DDR4 memory, and two 400 GB SSDs on a PERC H730 controller

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count6-Core Processor
  • Dual Xeon E5-2620 v3 CPUs deliver 12 cores at 2.4 GHz with 3.2 GHz turbo for parallel workloads
  • 512 GB DDR4 registered ECC memory across 16 slots supports large virtualisation and database tiers
  • PERC H730 1 GB controller enables RAID 0/1/5/6/10/50/60 for flexible data protection
  • Two 400 GB SATA SSDs provide fast boot and cache storage in hot-swap bays
  • Quad-port X520/I350 network card adds 2× 1 GbE and 2× 10 Gb SFP+ connectivity

Dual-socket Xeon 2U rack server

The Dell PowerEdge R730 is a 2U rack-mounted server system designed for enterprise workloads. It ships with two Intel Xeon E5-2620 v3 six-core processors running at 2.4 GHz, 512 GB of DDR4 registered ECC memory, and a PERC H730 storage controller. Dual 750 W redundant power supplies and iDRAC8 Enterprise remote management are included.

Virtualisation and database nodes

This configuration suits organisations deploying virtual desktop infrastructure, database clusters, or high-performance computing data nodes where dual-processor throughput and large memory capacity are required. Buyers who need more than two processor sockets, require drive interfaces beyond SATA and SAS, or need a non-rack form factor should evaluate other platforms.

512 GB DDR4 registered ECC memory

The system arrives with 512 GB of DDR4 2133 MHz registered ECC memory populated across 16 slots, leaving eight additional slots available for expansion up to the 1.5 TB maximum. This memory capacity and error-correcting architecture directly determine suitability for memory-intensive virtualisation and database workloads.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,746.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count6-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

Do I need to supply any DDR4 memory modules to reach the listed 512GB capacity?

No, the system arrives with 16 modules of 32GB DDR4 2133MHz Registered ECC already installed, filling 16 of the 24 available slots and providing the full 512GB.

Can the PERC H730 controller manage the existing 2.5-inch SATA SSDs together with older 2.5-inch SATA hard drives I might add?

Yes, the H730 supports both SAS and SATA drives, so the installed 400GB SATA SSDs and any additional 2.5-inch SATA HDDs can be configured in the same RAID arrays.

How can I confirm the iDRAC8 Enterprise remote management is active after the server is powered on?

Connect the dedicated iDRAC network port, then browse to the IP address shown on the front-panel LCD or issued by DHCP; the iDRAC8 Enterprise login screen will appear if the firmware is running correctly.

More in Rack & Tower Servers

Similar items