We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 2U rack server 2x Xeon E5-2660 v4 2.0GHz 14-core 256GB DDR4 H730 2x 300GB SAS

SKU CH-Z4KT-W2RYV

2U rack server with dual 14-core Xeon E5-2660 v4 CPUs, 256GB DDR4 ECC memory, PERC H730 RAID controller, two 300GB 10K SAS drives, quad-port 1GbE/10GbE networking, iDRAC8 Enterprise.

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count14-Core Processor
  • Dual 14-core Xeon CPUs deliver 28 cores at 2.0 GHz base
  • 256 GB DDR4 ECC memory across 24 slots supports heavy virtualisation
  • PERC H730 RAID controller with battery enables RAID 0/1/5/6/10/50/60
  • Dual 750 W platinum power supplies provide hot-swap redundancy
  • iDRAC 8 Enterprise gives full remote management access

PowerEdge R730 dual Xeon 14-core server

The Dell PowerEdge R730 is a 2U rack server equipped with two Intel Xeon E5-2660 v4 processors at 2.0 GHz, each providing 14 cores. It ships with 256 GB of DDR4 2400 MHz registered ECC memory across 8 modules and includes a PERC H730 1 GB RAID controller. Two 300 GB 10K SAS drives are installed in the 8-bay 2.5-inch chassis.

Suited to database clusters and VDI hosts.

The system fits midsize enterprises running data warehouses, e-commerce platforms, virtual desktop infrastructure or HPC data nodes. Dual 750 W platinum power supplies and iDRAC 8 Enterprise remote management support continuous operation. Buyers needing large-capacity solid-state storage or more than 24 DIMM slots should consider other platforms.

PERC H730 RAID controller with 1 GB cache

The installed PERC H730 12 Gb/s SAS/SATA controller provides RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes with a battery-backed 1 GB cache. This determines the storage performance and redundancy options available for the two 300 GB SAS drives and any additional disks added to the eight drive bays.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,076.99
Cheaper than about 71% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

What comes in the box and what must I buy separately?

The server ships with two Xeon E5-2660 v4 14-core processors, 256 GB DDR4 ECC memory, a PERC H730 controller with battery, two 300 GB 10K SAS drives, a quad-port X520/I350 network card, iDRAC8 Enterprise, two 750 W platinum PSUs, ready rails and a front bezel. No extra components are included.

Which memory capacity should I choose for this R730?

The unit already has 256 GB across eight 32 GB DDR4 2400 MHz registered ECC modules. The board supports up to 1.5 TB across 24 slots, so you can add more 32 GB DDR4 sticks later if the workload needs it.

What does the 2.0 GHz base clock mean once the server is running?

Each of the 28 cores runs at 2.0 GHz base and can turbo to 3.2 GHz under load, giving strong multi-threaded throughput for virtualization, databases and HPC tasks.

More in Rack & Tower Servers

Similar items