We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2U rack server with front bezel, eight 2.5-inch drive bays and dual hot-swap power supplies

DELL

DELL PowerEdge R730 2U rack server 2x Xeon E5-2660 v4 2.0GHz 14C 64GB DDR4 H730 2x 300GB SAS

SKU CH-YYMR-BGZSS

2U rack server with dual 14-core Xeon processors at 2.0GHz, 64GB DDR4, H730 RAID controller, and two 300GB SAS drives

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count14-Core Processor

Installed Memory Size 64GB

HDD 2 x 300GB 10K SAS

  • Dual 14-core Xeon processors at 2.0 GHz with 3.2 GHz turbo for heavy compute
  • 64 GB DDR4 2400 MHz registered ECC memory across 4 modules for large datasets
  • PERC H730 1 GB controller supports RAID 0/1/5/6/10/50/60 and pass-through
  • Dual 300 GB 10 K SAS drives plus 8-bay 2.5" chassis for expandable storage
  • iDRAC 8 Enterprise plus quad-port 1 GbE and 10 GbE SFP+ networking built in

Dual 14-core Xeon server

The Dell PowerEdge R730 is a 2U rack system fitted with two Intel Xeon E5-2660 v4 processors, each running at 2.0 GHz with 14 cores. It ships with 64 GB of DDR4 registered ECC memory installed across four 16 GB modules and uses the Intel C610 chipset.

Suits virtualisation and database nodes

This configuration targets midsize and large enterprises running data warehouses, e-commerce platforms, virtual desktop infrastructure or high-performance computing workloads. Buyers who need more storage bays than the eight 2.5-inch slots provided should consider a different chassis.

PERC H730 RAID controller with battery

Storage is managed by a Dell PERC H730 1 GB controller supporting RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode. Two 300 GB 10 K SAS drives are included, and the backplane accepts SAS or SATA devices.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $647.99
Cheaper than about 90% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730
Model nameR730
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

Which rack mounting hardware is included with this PowerEdge R730?

Ready Rails and a front bezel are included for installation in a standard 2U rack enclosure.

Can the existing 300GB SAS drives remain if I add larger capacity SAS or SATA drives later?

Yes, the PERC H730 controller supports mixed SAS and SATA drives across the eight 2.5-inch bays, so the current 300GB drives can stay while new drives are added.

How do I confirm the iDRAC8 Enterprise remote management is operating after the server is powered on?

Connect the dedicated iDRAC network port, then access the iDRAC web interface using its IP address to verify remote console, virtual media and system health monitoring are active.

More in Rack & Tower Servers

Similar items