DELL PowerEdge R740xd 2U rack server 2x Xeon Gold 5118 2.3GHz 12-core 64GB DDR4 24x 400GB SSD H730P
- 2U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2U rack server with dual 14-core Xeon processors, 768GB DDR4 memory, PERC H730 RAID controller and two 400GB SATA SSDs for virtualisation and database workloads
The Dell PowerEdge R730 is a 2U rack server built around two Intel Xeon E5-2683 v3 processors, each running at 2.0 GHz with 14 cores. It ships with 768 GB of DDR4 registered ECC memory across 24 slots, supporting up to 1.5 TB. This configuration targets midsize and large enterprises running data warehouses, e-commerce platforms, VDI, databases or high-performance computing nodes.
The 2U chassis holds eight 2.5-inch drive bays and includes two hot-swap 750 W platinum power supplies for redundancy. A PERC H730 1 GB controller manages SAS and SATA devices with RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through. Networking is handled by an Intel X520/I350 daughter card providing two 1 GbE and two 10 Gb SFP+ ports, while iDRAC8 Enterprise gives full remote management. Rails and a front bezel are included for immediate rack mounting.
Dual redundant power supplies and the 2U form factor allow the system to distribute thermal load across multiple fans, keeping the paired 14-core CPUs and 768 GB of memory within safe operating temperatures during sustained workloads. Platinum-rated efficiency reduces waste heat and overall power draw compared with lower-rated units. The hot-swap design means a failed supply can be replaced without shutting down the server, preserving uptime for critical applications.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge R730 |
| Model name | R730 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 14-Core Processor |
| Processor socket | LGA 2011-3 |
| Chipset | Intel C610 |
| Processor speed | 2 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 768 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 1.5 TB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | 2 × 400 GB SATA SSD |
| Disk controller | Dell Perc H730 1 GB Controller |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Dell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card |
| Ports & slots | |
| Network ports | 4 x Ports |
| Expansion card slots | 1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3) |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 2U |
| Software | |
| Operating system | No |
Other versions of this model
The PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50 and 60 plus pass-through mode.
Ready Rails and a front bezel are included for rack installation.
Two Xeon E5-2683 v3 CPUs and 24 x 32 GB DDR4 RDIMMs are pre-installed, filling all memory slots.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?