DELL PowerEdge R730 2U Rack Server 2x E5-2620 v3 2.4GHz 768GB DDR4 2x 800GB SSD
- 2U
- Rack
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2U rack server with dual 18-core Xeon processors at 2.3 GHz, 768 GB DDR4 memory, a PERC H730 RAID controller and two 800 GB SATA SSDs
The PowerEdge R730 is a 2U rack server fitted with two Intel Xeon E5-2699 v3 processors, each running 18 cores at 2.3 GHz with 3.6 GHz turbo. It ships with 768 GB of DDR4 ECC memory across 24 slots and a PERC H730 RAID controller managing two 800 GB SATA SSDs. Quad-port networking and iDRAC8 Enterprise remote management are included.
This configuration fits midsize and large enterprises running virtual desktop infrastructure, data-warehouse workloads, or high-performance computing nodes that benefit from high core counts and large memory capacity. The SATA SSD tier and DDR4 platform do not serve buyers who require PCIe-attached flash storage or support for newer memory generations.
The installed memory uses 24 registered ECC DDR4 modules totalling 768 GB, with a platform ceiling of 1.5 TB. This single figure determines whether the server can hold the working set for your workload or if a higher-capacity memory configuration is required.
Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.
New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | DELL |
| Product line | PowerEdge R730 |
| Model name | R730 |
| Product type | Rack |
| Processor | |
| Processor | Intel Xeon |
| Processor core count | 18-Core Processor |
| Processor socket | LGA 2011-3 |
| Chipset | Intel C610 |
| Processor speed | 2.3 GHz |
| Installed CPUs | 2 |
| Max supported CPUs | 2 |
| Memory | |
| Installed RAM | 768 GB |
| Type of memory | DDR4 |
| Maximum RAM capacity | 1.5 TB |
| Memory slot count | 24 |
| Storage | |
| Installed SSD | 2 × 800 GB SATA SSD |
| Disk controller | Dell Perc H730 1 GB Controller |
| Drive interface | SATA |
| Supported RAID levels | RAID 0/1/5/6/10/50/60 |
| Graphics | |
| Video RAM | 8 MB |
| Graphics chip | Matrox G200 |
| Connectivity | |
| Network controller | Dell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card |
| Ports & slots | |
| Network ports | 4 x Ports |
| Expansion card slots | 1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3) |
| Management interface | RJ 45 |
| Power | |
| Hot-swap redundant PSU | Yes |
| Size & build | |
| Rack height | 2U |
| Software | |
| Operating system | No |
Other versions of this model
The server ships with two 800 GB SATA SSDs installed in the 2.5" bays; six additional bays remain free for extra SATA or SAS drives if you need more capacity.
Each Xeon E5-2699 v3 can boost from 2.3 GHz to 3.6 GHz on active cores, giving short bursts of extra throughput for database queries or HPC tasks.
The PERC H730 supports 12 Gb/s SAS and 6 Gb/s SATA; installed SSDs run at SATA 6 Gb/s, so that link speed is the practical ceiling.
More in Rack & Tower Servers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?