We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2609 v3 384GB DDR4

SKU CH-1FDF-0TSC7

Eight 3.5-inch drive bays, dual 1.9 GHz Xeon processors and 384 GB DDR4 memory in a 2U rack server

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed1.9 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual Xeon E5-2609 v3 CPUs deliver 12 cores at 1.9GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large virtualisation clusters
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable high-capacity storage arrays
  • iDRAC8 Enterprise licence provides full remote lifecycle management
  • Redundant 495W power supplies maintain uptime during module failure

Dell PowerEdge R730 8-bay server

The Dell PowerEdge R730 is a 2U rack server fitted with two Intel Xeon E5-2609 v3 processors at 1.9GHz and 384GB of DDR4 ECC registered memory. Eight 3.5-inch drive bays connect through a PERC H730 SAS controller supporting SATA drives. Remote management uses iDRAC8 Enterprise. Dual 495W power supplies are installed.

Suits memory-heavy workloads in an eight-bay chassis

This configuration serves databases, virtualization hosts or backup targets that benefit from 384GB RAM and room for eight SATA drives. The two six-core CPUs provide moderate thread count. Buyers who need more than two processors, more than 768GB maximum memory, or a different drive interface should look at another platform.

PERC H730 SAS controller with eight 3.5-inch bays

The storage subsystem centres on a Dell PERC H730 RAID controller driving up to eight 3.5-inch SATA bays. No drives are included, so the buyer must supply compatible SATA disks. This controller and bay count define whether the server fits the intended storage layout.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,390.99
Cheaper than about 62% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 1.9 GHz
Lower than about 94% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed1.9 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity768 GB
Storage
Installed storage8,00
Disk controllerDell PERC H730 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC8 - Enterprise License

Questions about this item

What power supplies must already be present in the rack to run the dual 495W units in this R730?

The server includes two 495W power supplies for 12th Gen; ensure the rack PDU can deliver enough 12 V current for both units simultaneously.

Will the PERC H730 controller recognise older 3.5 inch SATA drives I want to reuse in the eight drive bays?

The H730 SAS controller supports SATA HDDs, so existing 3.5 inch SATA drives can be installed in the eight bays and configured in RAID.

How can I confirm the iDRAC8 Enterprise licence is active after the firmware update?

Log into the iDRAC web interface; the dashboard will display Enterprise licence status and show both Xeon E5-2609 v3 CPUs at 1.9GHz with 384GB DDR4 memory.

More in Rack & Tower Servers

Similar items