We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Dell PowerEdge R730 rack server silver front eight 3.5 inch drive bays

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2680v4 384GB DDR4 No Drive Server

SKU CH-8JAJ-98GYM

Dual 14-core Xeon server with 384GB DDR4, eight 3.5-inch bays and PERC H730 RAID

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.4 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual 14-core Xeon processors at 2.4 GHz deliver high multi-thread throughput
  • 384 GB DDR4 ECC registered memory supports large virtualised workloads
  • PERC H730 SAS RAID controller provides hardware RAID for up to eight 3.5" drives
  • Dual 10 GbE plus dual 1 GbE network ports enable fast storage and management traffic
  • iDRAC8 Enterprise remote management allows full out-of-band server control

Dual Xeon E5-2680v4 14-core server

The Dell PowerEdge R730 is a 2U rack server equipped with two Intel Xeon E5-2680v4 processors running at 2.4 GHz, each providing 14 cores and 35 MB cache. It targets organisations that need dense compute for virtualisation, database workloads or high-performance computing clusters. The system ships with 384 GB of DDR4 ECC registered memory installed across 24 DIMM slots.

Tool-less rail installation with iDRAC8 remote setup

The chassis supports tool-less mounting on standard square-hole racks using optional sliding rails that lock without screws. Eight 3.5-inch drive bays accept SATA or SAS drives and connect to the integrated PERC H730 RAID controller; cabling is pre-routed so adding storage does not require opening the case. Firmware and BIOS are updated to the latest stable release before dispatch, and iDRAC8 Enterprise enables full out-of-band management for headless deployment.

384 GB DDR4 with 768 GB ceiling and eight-bay

The 384 GB memory configuration leaves half the maximum 768 GB capacity free for future expansion across the remaining DIMM slots. Eight front-accessible 3.5-inch bays provide ample room for high-capacity SATA or SAS arrays behind the H730 controller. Dual 495 W power supplies deliver redundancy for the populated processors, memory and storage, while the integrated Intel I350 and X540 adapters supply two 1 GbE and two 10 GbE ports for network segmentation.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,640.99
Cheaper than about 56% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.4 GHz
Higher than about 60% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.4 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity768 GB
Storage
Installed storage4,00
Disk controllerDell PERC H730 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC8 - Enterprise License

Questions about this item

How do I verify the PERC H730 RAID controller is recognised after power-on?

During POST the controller BIOS will display its firmware version and list any connected drives; the iDRAC8 Enterprise dashboard also shows the H730 status and drive health once the server boots.

What components are included and which must be sourced separately?

The chassis ships with two Xeon E5-2680v4 CPUs, 384 GB DDR4 ECC registered memory, the PERC H730 SAS controller, dual 495 W power supplies and an Intel I350/X540 quad-port network card; 3.5-inch drives and rail kit are not included.

Which memory capacity should I select if I need room to grow?

The system holds 384 GB of DDR4 today and supports up to 768 GB across its DIMM slots, so choosing the current 384 GB configuration leaves half the maximum capacity available for future expansion.

More in Rack & Tower Servers

Similar items