We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2698 v3 512GB DDR4 rack server

SKU CH-0X0M-MN8SB

A 2U rack server with eight 3.5-inch drive bays, dual 16-core Xeon processors at 2.3GHz and 512GB DDR4 memory

  • ProcessorIntel Xeon
  • Installed RAM512 GB
  • Type of memoryDDR4
  • Processor speed2.3 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual Xeon E5-2698 v3 CPUs deliver 32 cores at 2.3GHz
  • 512GB DDR4 ECC memory supports heavy virtualization workloads
  • PERC H730 SAS controller enables flexible RAID storage
  • Eight 3.5-inch drive bays allow high-capacity SATA arrays
  • iDRAC8 Enterprise provides full remote server management

Dell PowerEdge R730 8-bay rack server

This server is a 2U rack-mounted system built for workloads that demand high core counts and large memory capacity. It ships with two Intel Xeon E5-2698 v3 processors running at 2.3GHz, each providing 16 cores, and 512GB of DDR4 ECC registered memory installed. The chassis supports up to eight 3.5-inch drive bays and includes a PERC H730 SAS controller for RAID management.

Suits virtualisation hosts needing dense memory

Buyers who require more than two processor sockets or storage interfaces beyond SAS and SATA should consider other platforms. The integrated iDRAC8 Enterprise licence provides full out-of-band management for remote administration. Network connectivity includes two 10GbE and two 1GbE ports via Intel I350/X540 adapters.

512GB DDR4 ECC memory installed

The system holds 512GB of DDR4 ECC registered memory across its DIMM slots with a maximum supported capacity of 768GB. No drives are installed; the eight 3.5-inch bays accept SATA or SAS drives through the PERC H730 controller. Dual 495W power supplies provide redundancy for continuous operation.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,783.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 512 GB
Higher than about 80% of the 15,103 comparable items (median 128 GB).
Processor speed 2.3 GHz
Typical for this category: the median of 9,950 items is 2.3 GHz.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM512 GB
Type of memoryDDR4
Maximum RAM capacity768 GB
Storage
Installed storage32,00
Disk controllerDell PERC H730 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC8 - Enterprise License

Questions about this item

Will the 3.5" drive bays accept my existing SATA HDDs alongside the PERC H730 controller?

The chassis provides eight 3.5" bays with SATA backplane connectivity, and the PERC H730 SAS controller manages both SAS and SATA drives in any mix.

How can I confirm the dual Xeon E5-2698 v3 CPUs and 512 GB DDR4 are recognised after first boot?

Enter the BIOS or iDRAC8 Enterprise interface; both will show two 16-core processors at 2.3 GHz and the full 512 GB of DDR4 ECC registered memory.

Does the box include drive caddies, rail kit or any drives, or must I source them separately?

The server ships with two 495 W power supplies, the PERC H730 RAID controller and 2×10 GbE + 2×1 GbE networking; drives, caddies and rails are not included.

More in Rack & Tower Servers

Similar items