We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 12x3.5" 2x Xeon E5-2699 v4 384GB DDR4 No Drive Server

SKU CH-Z9KD-BX8DV

Rack server with twelve 3.5-inch bays, dual Xeon E5-2699 v4 processors and 384 GB DDR4 memory

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.2 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Two 22-core Xeon E5-2699 v4 processors at 2.2 GHz handle demanding workloads
  • 384 GB DDR4 ECC registered memory supports large datasets and virtualization
  • Twelve 3.5-inch drive bays with PERC H730 SAS controller enable high-capacity storage arrays
  • iDRAC8 Enterprise licence provides remote management and monitoring
  • Dual 1100 W power supplies and four-port 10 GbE / 1 GbE networking deliver redundancy and throughput

Dense 12-bay 2U server with dual 22-core Xeons

The Dell PowerEdge R730xd packs twelve 3.5-inch drive bays and two Xeon E5-2699 v4 processors running at 2.2 GHz with 55 MB cache each into a 2U rack chassis. It ships with 384 GB of DDR4 ECC registered memory and a PERC H730 SAS controller, while storage drives and rail kit are ordered separately. iDRAC8 Enterprise provides full remote management out of the box.

Buyers needing maximum internal HDD capacity in 2U

This configuration suits archives, backup targets and dense object stores that can fill twelve large-form-factor bays with SATA or SAS hard drives. Organisations that need more than two sockets, faster single-thread speed or GPU acceleration should evaluate other platforms. The installed 1100 W redundant power supplies support the current load with headroom for additional drives.

PERC H730 RAID controller dictates drive topology

The H730 handles RAID 0, 1, 5, 6, 10, 50 and 60 across all twelve bays and presents virtual disks to the operating system. Drive choice, array layout and spare strategy are the decisions that determine usable capacity and resilience. Memory can grow to 768 GB if workloads later demand more headroom.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,790.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.2 GHz
Lower than about 60% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity768 GB
Storage
Installed storage6,00
Disk controllerDell PERC H730 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC8 - Enterprise License

Questions about this item

What SATA speed does the PERC H730 controller cap the twelve 3.5-inch bays at in practice?

The PERC H730 SAS controller manages the twelve 3.5-inch bays through a SATA interface; actual throughput depends on the drives installed and the RAID level chosen.

What rack depth and rail clearance does the 36 x 24 x 10 inch chassis require?

The unit measures 36 inches deep, 24 inches wide and 10 inches high, so a standard 42U rack with at least 36 inches of usable depth and matching square-hole rails is needed.

How are the two Xeon E5-2699 v4 processors and 384 GB of DDR4 ECC registered memory installed, and what step is often missed?

Both CPUs are pre-installed in the dual sockets and the 384 GB of DDR4 ECC registered DIMMs populate the memory channels; the step often missed is verifying the firmware is updated to the latest stable version before first boot.

More in Rack & Tower Servers

Similar items