We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U rack server 2× Xeon E5-2660 v4 2.0GHz 14-core 64GB DDR4 2× 400GB SSD

SKU CH-Z7WJ-0CFWY

2U rack server with dual 14-core Xeon processors at 2.0 GHz, 64 GB DDR4 memory, PERC H730 RAID controller and two 400 GB SATA SSDs in a 24-bay chassis

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Video RAM8 MB
  • Installed SSD2 × 400 GB SATA SSD
  • ChipsetIntel C610
  • Processor core count14-Core Processor
  • Dual 14-core Xeon E5-2660 v4 at 2.0 GHz base, 3.2 GHz turbo
  • 64 GB DDR4-2400 registered ECC across 4 DIMMs
  • PERC H730 1 GB cache with RAID 0/1/5/6/10/50/60
  • Two 400 GB enterprise SATA SSDs installed
  • Quad-port networking: dual 1 GbE and dual 10 Gb SFP+

Dual 14-core Xeon server for dense storage workloads

The PowerEdge R730xd packs two Intel Xeon E5-2660 v4 processors, each running at 2.0 GHz with 14 cores and a 3.2 GHz turbo frequency. Sixty-four gigabytes of DDR4 registered ECC memory across 24 slots supports virtualisation and database tasks. Twenty-four 2.5-inch drive bays and a PERC H730 controller with 1 GB cache enable large local datasets.

Sustained throughput from redundant power

Dual 750-watt platinum power supplies and hot-swap redundancy keep the system running during extended compute or I/O bursts. The 2U chassis airflow design maintains stable temperatures for both CPUs and the 24-bay backplane. Quad-port networking with two 1 GbE and two 10 Gb SFP+ links feeds data continuously without saturating a single uplink.

Twenty-four 2.5-inch bays decide the fit

The defining constraint is the 24-bay 2.5-inch chassis paired with the H730 RAID controller supporting RAID 0, 1, 5, 6, 10, 50, 60 and pass-through. Buyers who need more than 24 front-accessible drives or a different drive form factor cannot use this platform.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $638.99
Cheaper than about 90% of the 17,641 comparable items (median $1,910.99).
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count14-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSD2 × 400 GB SATA SSD
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

How much power do the two 750 Watt PSUs draw when the server runs 24/7?

Each supply is rated at 750 watts platinum efficiency; actual draw depends on load but the redundant pair shares the workload to keep heat and noise lower than a single unit would.

Which caddies and rails are required to populate the 24 front 2.5-inch bays?

The chassis includes ready rails for rack mounting; drive caddies for 2.5-inch SATA or SAS devices are not included and must be sourced separately.

Will the PERC H730 controller recognise older 6 Gb/s SATA drives I already own?

Yes — the H730 supports SATA 6 Gb/s and SAS 12 Gb/s, so legacy 6 Gb/s SATA SSDs or HDDs work in pass-through or any RAID level the card offers.

More in Rack & Tower Servers

Similar items