We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2680 v3 2.5GHz 12-core 768GB DDR4 12x 3.5" trays H730

SKU CH-YK3Z-JEDZ8

A 2U rack server with dual 12-core Xeon processors at 2.5 GHz, 768 GB DDR4 ECC memory, a PERC H730 RAID controller and twelve 3.5-inch drive trays

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count12-Core Processor
  • Dual 12-core Xeon processors handle demanding workloads with 2.5GHz base and 3.3GHz turbo speeds
  • 768GB DDR4 ECC memory across 24 slots supports large virtualisation and database tasks
  • PERC H730 controller with 1GB cache enables RAID 0/1/5/6/10/50/60 for flexible data protection
  • Twelve 3.5-inch hot-swap trays accept SAS or SATA drives for high-capacity storage
  • Dual 750W platinum power supplies and iDRAC8 Enterprise provide redundancy and remote management

Dual Xeon E5-2680 v3 compute node

The Dell PowerEdge R730xd is a 2U rack server built around two 12-core Xeon E5-2680 v3 processors running at 2.5 GHz with a 3.3 GHz turbo frequency. It targets midsize and large enterprises that run data warehouses, e-commerce platforms, virtual desktop infrastructure, databases or high-performance computing workloads where dense storage and strong multi-threaded performance are required.

768 GB DDR4 with 1.5 TB ceiling

The system ships with 768 GB of registered ECC DDR4-2133 memory populated across all 24 DIMM slots using 32 GB modules. This configuration leaves no free slots for expansion; the platform maximum is 1.5 TB, so any growth demands replacing existing modules. Twelve 3.5-inch SAS/SATA drive trays connect to a PERC H730 controller with 1 GB cache supporting RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes.

Dual 750 W platinum supplies with iDRAC8

Redundant hot-swap 750 watt platinum-efficiency power supplies deliver N+1 resilience for the fully populated chassis. The Intel X520/I350 daughter card provides two 1 GbE and two 10 Gb SFP+ ports for flexible network connectivity. iDRAC 8 Enterprise enables full out-of-band remote management including virtual console, power control and hardware monitoring without loading the host operating system.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,381.99
Pricier than about 58% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count12-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.5 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA/SAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Questions about this item

Will the 12-core Xeon E5-2680 v3 processors at 2.5 GHz work with my existing DDR4 2133 MHz registered ECC modules?

Yes, the server uses DDR4 2133 MHz registered ECC memory across 24 slots, so your existing modules of that type will be compatible.

How can I verify the PERC H730 controller and iDRAC8 Enterprise are operating correctly after installation?

During POST the H730 BIOS will list attached drives and RAID status, while iDRAC8 Enterprise provides a dedicated web interface for sensor readings, firmware versions and remote console access.

The listing shows 12 drive trays but no drives — what else must I purchase to populate the bays?

You need to buy 3.5-inch SAS or SATA hard drives or SSDs separately; the 12 included trays accept either interface and the H730 controller supports RAID 0, 1, 5, 6, 10, 50 and 60.

More in Rack & Tower Servers

Similar items