We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R730xd 2U rack server 2x Xeon E5-2699 v3 2.3GHz 18C 768GB DDR4 12x 4TB H730

SKU CH-YKN6-BRQ5Z

2U rack server with dual 18-core Xeon processors at 2.3 GHz, 768 GB DDR4 ECC memory, twelve 4 TB SATA drives on an H730 RAID controller, quad-port 1 GbE and 10 GbE networking.

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C610
  • Processor core count18-Core Processor
  • Dual 18-core Xeon processors at 2.3 GHz with 3.6 GHz turbo for heavy multi-threaded workloads
  • 768 GB DDR4 ECC memory across 24 slots supports large virtualisation clusters
  • PERC H730 controller enables RAID 0 1 5 6 10 50 60 for flexible data protection
  • Twelve 4 TB 7.2K SATA drives deliver high-capacity local storage in a 2U chassis
  • Dual 750 W platinum power supplies plus iDRAC8 Enterprise ensure resilient remote management

Enterprise 2U rack server

The Dell PowerEdge R730xd is a 2U rack server built for data-intensive workloads such as virtualisation, databases and high-performance computing nodes. It ships with two Intel Xeon E5-2699 v3 processors, each delivering 18 cores at 2.3 GHz with a 3.6 GHz turbo frequency.

Installation notes

The chassis includes ready rails and a front bezel for standard rack mounting. Twelve 3.5-inch drive bays and 24 DDR4 memory slots are populated, so hardware assembly is largely complete. Buyers should verify rack depth and power-phase availability before installation.

Pre-order checks

Confirm your rack can accommodate a 2U form factor and that the power distribution units can supply two 750 W platinum-efficiency supplies. The PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50 and 60; ensure your storage topology matches these levels. Network uplinks use two 1 GbE and two 10 Gb SFP+ ports — check switch compatibility.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $3,485.99
Pricier than about 70% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R730XD
Model nameR730xd
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count18-Core Processor
Processor socketLGA 2011-3
ChipsetIntel C610
Processor speed2.3 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Memory slot count24
Storage
Installed SSDNo
Disk controllerDell Perc H730 1 GB Controller
Drive interfaceSATA
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

How do I verify the PERC H730 controller and all twelve 4 TB drives are healthy after installation?

Open the iDRAC8 Enterprise web interface, navigate to the Storage section, and confirm the H730 shows Optimal status with all twelve 4 TB SATA drives reporting Ready and no foreign configurations present.

Which rails, bezel and network daughter card ship with the server, and what must I source separately?

Ready Rails and the front bezel are included; the Intel X520/I350 quad-port card providing two 1 GbE and two 10 Gb SFP+ ports is also installed. Only SFP+ transceivers or DAC cables for the 10 Gb links need to be purchased separately.

Should I choose the 768 GB DDR4 configuration or add more memory up to the 1.5 TB maximum?

The system arrives with 24 × 32 GB DDR4 2133 MHz registered ECC modules filling every slot. To exceed 768 GB you must replace existing modules with higher-capacity DDR4 RDIMMs; select the larger capacity only if your workload requires more than 768 GB.

More in Rack & Tower Servers

Similar items