DELL PowerEdge R740 8LFF 2x Xeon Gold 5120 64GB DDR4 No Drive

Dual Xeon Gold 5120 Server

The Dell PowerEdge R740 arrives as a 2U rack-mount server populated with two Xeon Gold 5120 processors. Each CPU runs at 2.2 GHz and provides fourteen cores, giving twenty-eight threads for virtualisation or database workloads. Sixty-four gigabytes of DDR4 ECC registered memory are installed, leaving room to expand toward the three-terabyte maximum. Eight 3.5-inch drive bays accept SATA drives through the PERC H730P RAID controller, while iDRAC9 Enterprise handles remote management. No drives are included, so buyers supply their own storage.

Sustained Load Behaviour

Dual 750-watt power supplies feed both processors and the memory subsystem during continuous operation. The PERC H730P controller maintains RAID parity calculations without a separate battery-backed cache module mentioned in the data. Integrated graphics keep the PCIe slots free for additional network or storage adapters. The 10 GbE two-port 562T adapter moves data between nodes without saturating the CPU. Thermal design supports the full component set at the listed dimensions and weight.

Interface Limits

SATA drives connect through the H730P at the interface's native six-gigabit-per-second ceiling, so sequential throughput tops out there. The eight-bay chassis caps raw device count at eight 3.5-inch drives, limiting maximum array capacity to the drive sizes you install. DDR4 memory slots stop at the three-terabyte architectural ceiling, and the two-socket board cannot accept a third processor. The 10 GbE ports provide the fastest onboard network path; faster fabric would need an add-in card.