We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R740xd 24SFF 2x Xeon Platinum 8268 384GB DDR4 No Drive

SKU CH-BCH6-DPRQT

24-bay 2.5-inch rack server with dual 2.9 GHz Xeon Platinum 8268 processors and 384GB DDR4 memory

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Type of memoryDDR4
  • Processor speed2.9 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • 24 SFF bays support dense 2.5" storage arrays
  • Dual Xeon Platinum 8268 CPUs run at 2.9 GHz
  • 384 GB DDR4 ECC memory handles heavy workloads
  • PERC H730P RAID controller manages drive redundancy
  • iDRAC9 Enterprise enables full remote server management

High-density 24-bay server for storage-heavy

The Dell PowerEdge R740xd chassis fits twenty-four 2.5-inch drive bays in a 2U rack frame, giving storage-heavy workloads a dense platform. Two Xeon Platinum 8268 processors at 2.9 GHz deliver forty-eight cores for database, virtualisation or analytics tasks. Three hundred and eighty-four gigabytes of DDR4 ECC registered memory supports large in-memory datasets. The system ships without drives so you can populate the bays with the capacity and endurance profile your workload demands.

Sustained throughput with hardware RAID and 10 GbE

A PERC H730P RAID controller manages the backplane, providing hardware-accelerated RAID levels that keep write latency predictable during extended rebuilds or streaming ingest. Dual 1100 W power supplies share the load, reducing thermal stress on any single unit during continuous operation. The integrated 10 GbE two-port 562T adapter moves data off the array at wire speed without saturating the PCIe bus. iDRAC9 Enterprise remote management lets operators monitor temperatures, power draw and drive health in real time without leaving the console.

Rack-ready build with tool-less rails

The chassis measures thirty-six by twenty-four by ten inches and weighs forty pounds, fitting standard four-post racks with the optional tool-less rail kit. Front-facing drive carriers lock without tools, so drive swaps take seconds during a maintenance window. Rear I/O groups the 10 GbE ports, management NIC and power inlets together, keeping cable runs short and airflow clean. All firmware is updated to the latest stable release before shipment, and each unit passes a full burn-in diagnostic to verify sustained stability.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $2,411.99
Pricier than about 58% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Processor speed 2.9 GHz
Higher than about 88% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.9 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity3 TB
Storage
Installed storage3,84
Disk controllerDell PERC H730P Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC9 - Enterprise License

Questions about this item

How much power do the two 1100W supplies draw when the server runs 24/7 at full load?

Each supply is rated at 1100W; actual draw depends on the workload placed on the two Xeon Platinum 8268 processors and the 384GB DDR4 memory.

Which drive caddies and backplane cables must I already have to populate the 24 x 2.5" SFF bays?

The chassis accepts 24 x 2.5" SATA drives and uses the PERC H730P controller; matching caddies and backplane cables are required for installation.

Will the PERC H730P RAID controller recognise older SATA drives I want to reuse from a previous server?

The PERC H730P supports SATA drives connected to its 24-bay backplane; legacy SATA disks will be detected if they meet the controller's firmware requirements.

More in Rack & Tower Servers

Similar items