We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R740xd2 2U rack server 2x Xeon Gold 6154 3.0GHz 18C 256GB DDR4 26x 4TB SATA HBA330

SKU CH-4BAC-47DFS

2U rack server with dual 18-core Xeon Gold 6154 CPUs, 256GB DDR4 ECC, 26-bay 3.5" SATA storage and HBA330 controller

  • ProcessorIntel Xeon
  • Installed RAM256 GB
  • Installed SSDNo
  • Processor core count18 Core-Processors
  • Operating systemNo
  • Type of memoryDDR4
  • 36-core Xeon Gold 6154 processors at 3.0 GHz handle heavy compute workloads
  • 256 GB DDR4 ECC memory across 16 slots supports data integrity
  • 26 × 4 TB 7.2K SATA drives deliver massive raw storage capacity
  • HBA330 controller with 12 Gb/s SAS/SATA connectivity manages the full drive set
  • Dual 1100 W platinum power supplies with iDRAC 9 Enterprise enable resilient remote management

Dense 2U storage server

The Dell PowerEdge R740xd2 packs twenty-six 3.5-inch bays into a 2U rack frame, delivering over one hundred terabytes of raw SATA capacity. Dual Xeon Gold 6154 processors supply thirty-six cores at 3.0 GHz with 3.7 GHz turbo for parallel workloads. Two hundred fifty-six gigabytes of DDR4-2666 ECC registered memory support data-integrity requirements.

Hot-swap drive access and redundant power

Twenty-six front-accessible trays allow drive replacement without shutting down the chassis. The PERC HBA330 controller presents the drives to the operating system in JBOD or pass-through mode for software-defined storage stacks. Dual 1100 W platinum power supplies share the load and maintain operation if one unit fails.

Remote management and high-speed networking included

iDRAC 9 Enterprise provides out-of-band console, power control and firmware updates over a dedicated network port. A Broadcom 57414 dual-port 10/25 Gb SFP28 OCP 2.0 mezzanine card adds low-latency connectivity for clustered storage or backup targets. The front bezel and sliding rails are not supplied and must be sourced separately.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $6,064.99
Pricier than about 80% of the 17,641 comparable items (median $1,910.99).
Installed RAM 256 GB
Higher than about 60% of the 15,103 comparable items (median 128 GB).
Processor core count 18 Core-Processors
Higher than about 70% of the 7,955 comparable items (median 16).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameR740xd2
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count18 Core-Processors
Processor socketLGA 3647
Processor speed3.0 GHz (3.7 GHz Turbo)
Processor detailsGold 6154
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM256 GB
Type of memoryDDR4
Maximum RAM capacity1 TB
Memory slot count16
Storage
Installed SSDNo
Installed storage26 × 4 TB 7.2K SATA
Disk controllerDell Perc HBA330 Controller
Drive interfaceSATA
Supported RAID levelsNone
Connectivity
Network controller1x Integrated Dual Port 1GbE LOM and 1x Dell EMC Broadcom 57414 Dual Port 10/25Gb SFP28 OCP 2.0 Mezzanine Card
Ports & slots
Network ports4 x Ports
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo
More details
Management controlleriDRAC9 Enterprise

Questions about this item

What SATA speed does the PERC HBA330 controller support for the 26 installed 4TB drives?

The controller runs at 12Gb/s SAS/SATA, so each 3.5-inch 7.2K drive connects at 6Gb/s SATA.

How many DDR4 memory slots are free after the factory 256GB configuration?

Eight of the 16 slots are populated with 32GB modules, leaving eight slots available for expansion up to 1TB total.

Which firmware step is often missed when adding the 57414 dual-port 10/25Gb mezzanine card?

After seating the OCP 2.0 card, update iDRAC 9 Enterprise and the card firmware before configuring the SFP28 links.

More in Rack & Tower Servers

Similar items