We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R750 2U rack server 2x Xeon Gold 6330 2.0GHz 28-core 768GB DDR4 12x 4TB HDD

SKU CH-8WR3-GAYTE

A 2U rack server with dual 28-core Xeon processors, 768GB DDR4 memory, and twelve 4TB SATA drives

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Processor core count28-Core Processor
  • Operating systemNo
  • Type of memoryDDR4
  • Dual Xeon Gold 6330 CPUs with 28 cores each for heavy compute
  • 768GB DDR4 2933MHz ECC memory for large workloads
  • 12x 4TB 7.2K SATA drives for high-capacity storage
  • HBA355i controller with SAS12Gb/s pass-through connectivity
  • iDRAC9 Enterprise plus dual 1400W platinum PSUs for management and power redundancy

Dell PowerEdge R750 2U rack server

This Dell PowerEdge R750 is a 2U rack server equipped with dual Intel Xeon Gold 6330 processors, each running at 2.0GHz with 28 cores. It includes 768GB of DDR4 registered ECC memory across 24 modules and twelve 4TB 7.2K SATA 3.5-inch hard drives. The system ships with an HBA355i host bus adapter, dual 1400W platinum power supplies, iDRAC9 Enterprise, rails and a front bezel.

Suited for dense virtualisation

Organisations needing high core counts and large memory capacity in a 2U form factor will find this configuration appropriate. Buyers who require hardware RAID offload should look elsewhere because the HBA355i provides pass-through only. Those needing NVMe or SAS SSD performance instead of 7.2K SATA hard drives should also consider alternative storage layouts.

Pass-through HBA355i controller determines storage

The Dell PERC HBA355i is a 12Gb/s SAS pass-through adapter with no RAID capability, so drive redundancy or performance tiers must be handled in software or by an additional controller. This single specification decides whether the server matches the intended storage architecture.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $12,819.99
Pricier than about 90% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R750
Model nameR750
Part number2 GHz
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count28-Core Processor
Processor socketLGA 4189
Processor speed32
Installed CPUsGold 6330
Max supported CPUs2
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity2 TB
Storage
Disk controllerDell Perc HBA355i Controller
Drive interfaceSATA
Supported RAID levelsNone
Optical drive0
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell EMC 15G Broadcom 57412 Dual Port 10GbE SFP+ OCP 3.0 Network Card
Ports & slots
Network ports2 x Ports
Expansion card slots0
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height2U
Software
Operating systemNo
More details
AI capabilityNone

Questions about this item

How much heat do the two Xeon Gold 6330 CPUs and twelve 7.2K SATA drives produce under continuous load?

The server uses two 1400 W platinum power supplies with redundant hot-swap design to handle sustained operation.

Which cables or adapters are required to connect the PERC HBA355i to the twelve 3.5-inch drive bays?

The HBA355i provides SAS 12Gb/s pass-through on a PCIe host bus adapter; the chassis includes backplane connections for the 12 SATA drives.

Can the Broadcom 57412 10GbE SFP+ OCP 3.0 card share a switch with older 1 GbE copper ports?

The OCP 3.0 network card uses SFP+ transceivers for 10 GbE links; compatibility depends on the switch ports and modules you install.

More in Rack & Tower Servers

Similar items