We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R930 4U 24x 2.5" 4x Xeon E7-8891 v4 2.8GHz 10C 384GB DDR4 H330 4x 1.8TB HDD

SKU CH-Q18B-XVKXC

A 4U rack server with four 10-core Xeon processors at 2.8 GHz, 384 GB DDR4, a PERC H330 controller and 24 drive bays populated with 1.8 TB SAS HDDs

  • ProcessorIntel Xeon
  • Installed RAM384 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C602J
  • Processor core count10-Core Processor
  • Four 10-core Xeon E7-8891 v4 CPUs at 2.8 GHz with 3.5 GHz turbo
  • 384 GB DDR4-2400 registered ECC memory across 48 DIMM slots
  • PERC H330 12 Gb/s SAS/SATA controller with RAID 0/1/5/10/50
  • Four 1.8 TB 10 K SAS drives in 24-bay 2.5" chassis
  • Quad-port X520/I350 with 2× 1 GbE and 2× 10 Gb SFP+ plus iDRAC8 Enterprise

Mission-critical server

The Dell PowerEdge R930 is a 4U rack server designed for enterprise workloads that demand maximum memory and internal storage. It ships with four Intel Xeon E7-8891 v4 processors, each running at 2.8GHz with ten cores. The system includes 384GB of DDR4 registered ECC memory and four 1.8TB SAS hard drives. It targets organisations running large databases, virtualization clusters, or ERP platforms.

96 DIMM slots for 12TB maximum memory

The defining specification is the memory architecture: 96 DDR4 slots support up to 12TB of registered ECC RAM. The current 384GB configuration uses 48 modules, leaving half the slots free for future expansion. This density makes the R930 suitable for in-memory analytics and high-VM-count environments where memory capacity outweighs raw clock speed.

Hot-plug bays simplify drive changes

All 24 front-accessible 2.5-inch bays support hot-plug SAS or SATA drives, so failed disks can be swapped without downtime. The PERC H330 controller manages RAID 0, 1, 5, 10, and 50. Installers should verify rail depth against their rack and confirm 1100W power supply redundancy matches the facility PDU layout.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $3,811.99
Pricier than about 71% of the 17,641 comparable items (median $1,910.99).
Installed RAM 384 GB
Higher than about 75% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R930
Processor
ProcessorIntel Xeon
Processor core count10-Core Processor
Processor socketLGA 2011
ChipsetIntel C602J
Processor speed2.8 GHz
Installed CPUs4
Max supported CPUs4
Memory
Installed RAM384 GB
Type of memoryDDR4
Maximum RAM capacity12 TB
Memory slot count96
Storage
Installed SSDNo
Disk controllerDell Perc H330 Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/10/50
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management interfaceRJ 45
Size & build
Rack height4U
Software
Operating systemNo

Other versions of this model

5 more in the same range

Questions about this item

How much memory can the system actually hold once the four Xeon E7-8891 v4 processors are installed?

The board provides 96 DIMM slots and supports up to 12 TB of DDR4; the unit ships with 384 GB in 48 modules, leaving 48 slots free for further expansion.

What throughput does the PERC H330 controller limit the 24-bay SAS backplane to in practice?

The H330 is a 12 Gb/s SAS/SATA controller, so each drive tops out at 12 Gb/s; the backplane serves all 24 bays through that same 12 Gb/s link.

What rack depth and mounting hardware does the 4U chassis require?

The server is a 4U rack-mount unit and includes Dell Ready Rails plus a front bezel for installation in standard four-post racks.

More in Rack & Tower Servers

Similar items