We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL PowerEdge R940 3U rack server 4x Xeon Gold 6134 3.2GHz 8C 768GB DDR4 8x 2.4TB SAS H730P

SKU CH-7BY9-BKZCD

3U rack server with four Xeon Gold 6134 processors, 768GB DDR4, eight 2.4TB SAS drives on a PERC H730P controller, quad-port 1GbE and 10GbE networking, iDRAC9 Enterprise, and dual 1600W power supplies

  • ProcessorIntel Xeon
  • Installed RAM768 GB
  • Video RAM8 MB
  • Installed SSDNo
  • ChipsetIntel C620
  • Processor core count8-Core Processor
  • 4 Xeon Gold 6134 CPUs deliver 32 cores at 3.2 GHz base clock
  • 768 GB DDR4 ECC memory across 24 DIMM slots for large datasets
  • PERC H730P controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • 8 × 2.4 TB 10K SAS drives provide high-capacity storage
  • iDRAC9 Enterprise enables full remote server management

Mission-critical 3U rack server

The Dell PowerEdge R940 is a 3U rack-mounted server system built for mission-critical workloads. It ships new with four Intel Xeon Gold 6134 processors, each running at 3.2 GHz with eight cores and a 3.7 GHz turbo frequency. The system includes 768 GB of DDR4 2666 MHz registered ECC memory across 24 modules and uses the Intel C620 chipset on an LGA 3647 platform.

Suited for dense compute, not for smaller racks

This server suits organisations that need maximum processor density and memory capacity in a 3U footprint with redundant 1600 W platinum power supplies. Buyers who require a 1U or 2U form factor, fewer than four sockets, or a lower entry memory configuration should evaluate other platforms. The eight 2.5-inch drive bays are populated with 2.4 TB 10K SAS drives behind a PERC H730P controller supporting RAID 0, 1, 5, 6, 10, 50 and 60.

768 GB DDR4 across 48 slots decides fit

The single specification that determines suitability is the 768 GB DDR4 2666 MHz registered ECC memory installed across 48 DIMM slots with a 6 TB maximum capacity. This memory configuration and expansion ceiling dictate whether the server matches the application footprint and future growth requirements.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $6,637.99
Pricier than about 82% of the 17,641 comparable items (median $1,910.99).
Installed RAM 768 GB
Higher than about 90% of the 15,103 comparable items (median 128 GB).
Video RAM 8 MB
Typical for this category: the median of 8,309 items is 0.01 GB.

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge R940
Model nameR940
Product typeRack
Processor
ProcessorIntel Xeon
Processor core count8-Core Processor
Processor socketLGA 3647
ChipsetIntel C620
Processor speed3.2 GHz
Installed CPUs4
Max supported CPUs4
Memory
Installed RAM768 GB
Type of memoryDDR4
Maximum RAM capacity6 TB
Memory slot count48
Storage
Installed SSDNo
Disk controllerDell Perc H730P 2 GB Controller
Drive interfaceSAS
Supported RAID levelsRAID 0/1/5/6/10/50/60
Graphics
Video RAM8 MB
Graphics chipMatrox G200
Connectivity
Network controllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
Ports & slots
Network ports4 x Ports
Expansion card slotsUp to 13 PCIe Gen 3 Slots, 3x PCIe x8, and 10 x PCIe 3.0 x16 slots
Management interfaceRJ 45
Power
Hot-swap redundant PSUYes
Size & build
Rack height3U
Software
Operating systemNo

Questions about this item

What SAS speed does the PERC H730P controller support for the 2.4TB drives?

The PERC H730P is a 12Gb/s SAS controller, so the eight 2.4TB drives connect at up to 12Gb/s each.

What physical space and rails are required to mount this 3U server?

The system is a 3U rack unit that ships with Ready Rails for tool-less installation in standard square-hole or round-hole 4-post racks.

How is the 768GB of DDR4 memory installed across the 48 slots, and what mistake should be avoided?

Memory is populated as 24 x 32GB DDR4 2666MHz registered ECC DIMMs; install in matched sets per processor to avoid reduced performance or boot failure.

More in Rack & Tower Servers

Similar items