DELL PowerEdge T430 5U Rack Server 2× Xeon E5-2650 v4 2.2GHz 12-Core 64GB DDR4 HBA330 2× 750W PSU

Enterprise 5U server for virtualization

The Dell PowerEdge T430 is a 5U tower server designed for businesses that need reliable compute power with flexible storage capacity. It ships with two Intel Xeon E5-2650 v4 processors, each running at 2.2 GHz with a 2.9 GHz turbo frequency and twelve cores. The system includes 64 GB of DDR4-2400 ECC registered memory across four modules, leaving eight slots free for expansion up to 384 GB. A PERC HBA330 controller manages storage connectivity for SAS and SATA drives.

Sustained load behavior

Under continuous workloads such as virtualization clusters or database hosting, the dual 12-core processors maintain stable frequencies across all twenty-four cores without thermal throttling in correctly ventilated racks. The two 750 W platinum-efficiency power supplies operate in redundant mode, so a single unit failure does not interrupt service. Sixteen hot-swap 2.5-inch drive bays allow storage arrays to rebuild or expand while the server remains online, and the HBA330 controller provides direct 12 Gb/s SAS/SATA throughput without RAID overhead.

Installation notes and common pitfalls

The chassis accepts standard rack rails, but ready rails and the front bezel are not included and must be sourced separately. Memory population follows specific channel rules; mixing unregistered or non-ECC modules will prevent boot. The HBA330 operates in HBA mode only, so hardware RAID requires a different PERC card. Dual CPUs are required for full PCIe slot and memory channel access; single-processor configurations leave half the resources inactive.