DELL PowerEdge T440 5U Rack Server 2x Xeon Gold 5120 2.2GHz 14 Core 64GB DDR4 H330 4x 2.5" Trays 2x 750W PSU

Enterprise 5U Server with Dual Xeon Gold 5120

This Dell PowerEdge T440 is a 5U tower server that supports optional rack conversion for data-centre deployment. It ships with two Intel Xeon Gold 5120 processors, each running at 2.2 GHz with a 3.2 GHz turbo frequency and fourteen cores. The system includes 64 GB of DDR4-2400 ECC registered memory across sixteen slots, expandable to 1 TB. A PERC H330 storage controller manages up to sixteen 2.5-inch hot-swap drive bays, though only four drive trays are included.

Installation Notes for Tower-to-Rack Conversion

Mounting the 5U chassis into a standard rack requires the optional conversion kit, which is not supplied with this unit. The server weighs enough that two people or a mechanical lift are needed for safe placement. Drive trays must be populated before sliding the bays into the front chassis; missing trays leave gaps that disrupt airflow. The redundant 750 W platinum power supplies are hot-swappable, but both should be seated before first power-on to avoid a POST warning.

Pre-Order Compatibility Checklist

Verify that your rack cabinet accepts a 5U tower-form-factor chassis and provides sufficient depth for cabling at the rear. Confirm the facility power circuit can support dual 750 W supplies with the appropriate plug type. Ensure the operating system or hypervisor you plan to deploy supports the Xeon Gold 5120 microarchitecture and DDR4 ECC registered memory. Note that no drives, front bezel, or ready rails are included, so budget for those separately.