We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack server chassis with sixteen 2.5-inch drive bays and front control panel

DELL

DELL PowerEdge T630 16SFF 2x Xeon E5-2640 v3 64GB DDR4 No Drive rack server

SKU CH-9GB0-SA5FF

Rack server with sixteen 2.5-inch bays, dual Xeon processors at 2.6GHz, 64GB DDR4 memory and PERC H730 SAS controller

  • ProcessorIntel Xeon
  • Installed RAM64 GB
  • Type of memoryDDR4
  • Processor speed2.6 GHz
  • Installed CPUs2
  • Max supported CPUs2
  • Dual Xeon E5-2640 v3 processors deliver 16 cores at 2.6GHz
  • 64GB DDR4 ECC registered memory supports up to 1.5TB capacity
  • PERC H730 SAS controller manages 16 hot-swap 2.5in drive bays
  • Integrated iDRAC8 Enterprise enables remote management and monitoring
  • Dual 1100W power supplies provide redundant power for uptime

16-bay 2.5-inch rack server

The Dell PowerEdge T630 fits a 2U rack footprint and accepts up to sixteen 2.5-inch drives. Two Xeon E5-2640 v3 processors running at 2.6GHz deliver sixteen cores and 20MB cache each. Sixty-four gigabytes of DDR4 ECC registered memory are installed and the platform can scale to 1.5TB. The PERC H730 SAS controller manages storage through SATA or SAS interfaces.

Suited for virtualisation hosts needing dense

This configuration targets workloads that benefit from high drive counts and dual-socket compute, such as hypervisor clusters or database nodes. Buyers who need a single-processor layout, fewer than sixteen bays, or a tower chassis should consider other form factors. Environments requiring integrated GPU acceleration beyond basic display output will also find the graphics capability limited.

PERC H730 SAS controller with SATA support

The installed Dell PERC H730 RAID controller governs all drive connectivity and RAID levels. Because the server ships without drives, the controller choice determines which 2.5-inch SAS or SATA media can be added and how many arrays are supported. Verify the controller feature set against the intended storage topology before ordering.

How it compares

Measured against everything we stock in Rack & Tower Servers, at today’s prices. Recalculated every night.

Price $1,898.99
Typical for this category: the median of 17,641 items is $1,910.99.
Installed RAM 64 GB
Lower than about 70% of the 15,103 comparable items (median 128 GB).
Processor speed 2.6 GHz
Higher than about 80% of the 9,950 comparable items (median 2.3 GHz).

New to this? Buying server hardware with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameDELL
Product linePowerEdge
Model nameRack Mount
Product typeRack
Processor
ProcessorIntel Xeon
Processor speed2.6 GHz
Installed CPUs2
Max supported CPUs2
Memory
Installed RAM64 GB
Type of memoryDDR4
Maximum RAM capacity1.5 TB
Storage
Installed storage3.84,00
Disk controllerDell PERC H730 SAS Controller
Drive interfaceSATA
Graphics
Graphics chipIntegrated Graphics
Size & build
Product dimensions36 × 24 × 10 in
More details
Management controlleriDRAC8 - Enterprise License

Questions about this item

How do I verify the PERC H730 controller and iDRAC8 Enterprise are functioning after first boot?

During POST the PERC H730 BIOS will list the 16 2.5-inch bays and any drives you install. iDRAC8 Enterprise activates its own IP address on the dedicated management port; log in there to confirm firmware version and remote console access.

What components ship inside the chassis and which items must I source separately?

The unit arrives with two Xeon E5-2640 v3 processors at 2.6GHz, 64GB DDR4 ECC registered memory, dual 1100W power supplies, the PERC H730 SAS controller, and a 1Gb 2-port 332T network adapter. No drives or rail kit are included.

Which memory configuration should I select if I plan to expand beyond the installed 64GB?

The board supports up to 1.5TB total using DDR4 ECC registered modules. Populate remaining DIMM slots in matched pairs per processor to maintain quad-channel performance.

More in Rack & Tower Servers

Similar items