Seagate BarraCuda ST3000DM008 3TB 7200 RPM 64MB SATA 6.0Gb/s 3.5" internal hard drive
- 3 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 1.2 TB 2.5-inch SAS enterprise drive spinning at 10 000 RPM with a 12 Gb/s transfer rate and hot-swap capability
The Dell R3H6D is a 1.2TB 2.5-inch SAS hard drive spinning at 10000 RPM. It is built for enterprise storage arrays that demand consistent throughput and hot-swap capability. The bare drive ships without a carrier, so integrators must supply a compatible tray. It suits administrators who need reliable capacity in a compact form factor.
The SAS interface runs at 12Gb/s, yet the specification also lists a 6Gb/s average latency figure that reflects the physical link negotiation. Throughput will not exceed the controller’s maximum supported speed, and older backplanes may restrict the drive to 6Gb/s operation. Cable length and signal integrity become critical at the higher rate, so passive copper runs must stay within the standard’s reach.
Hot-swap trays allow drive replacement without powering down the chassis, but the bare unit requires a carrier that matches the server or enclosure. Misaligned connectors or a missing tray latch are the most common installation faults. Firmware mismatches between the drive and the RAID controller can also prevent the array from recognising the new spindle.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | R3H6D |
| Total capacity | 1.2 TB |
| Recommended use | For Enterprise Storage |
| Performance | |
| Rotational speed | 10,000 RPM |
| Mean latency | 6Gb/s |
| Ports & slots | |
| Interface type | SAS 6Gb/s |
| Size & build | |
| Form factor | 2.5 in (6.35 cm) |
Yes, this model is offered as a single 1.2TB capacity with a 2.5 inch form factor.
The 10000 RPM spindle provides low latency for random read and write workloads typical of enterprise storage arrays.
The drive supports a 12Gb/s SAS transfer rate; the 6Gb/s figure in the specification table refers to average latency.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?