Seagate BarraCuda ST8000DM004 8TB 5400 RPM 256MB SATA 3.5" internal hard drive
- 8 TB
- SATA 6.0Gb/s
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
146 GB 3.5" SAS drive spins at 15000 RPM with 16 MB cache for server workloads
The Dell RY491 is a 146GB 3.5-inch internal hard drive spinning at 15000 RPM with a 16MB cache. It connects through a Serial Attached SCSI (SAS) interface rated at 6Gb/s average latency. The drive is supplied as a bare unit with a tray and is built for server environments where consistent throughput matters.
At 15000 RPM the platters maintain high rotational speed during long read and write sequences, reducing latency spikes compared with slower drives. The 16MB buffer absorbs burst traffic while the SAS link keeps command queuing efficient across multiple outstanding I/O requests. This combination suits database logs, virtualisation hosts and other write-heavy server tasks that run for hours.
The low-profile 1.0-inch height allows tighter stacking in drive bays while still moving enough air to keep temperatures stable under continuous operation. SAS signalling runs at lower voltage than older parallel SCSI, helping limit power draw during sustained transfers. Acoustic output remains typical for a 15000 RPM mechanism in a server chassis where fan noise dominates.
Measured against everything we stock in 3.5-Inch Internal Desktop HDDs, at today’s prices. Recalculated every night.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Dell |
| Model name | RY491 |
| Total capacity | 146 GB |
| Recommended use | Ideal for Servers |
| Performance | |
| Rotational speed | 15,000 RPM |
| Mean latency | 6Gb/s |
| Storage | |
| Cache memory | 16 MB |
| Ports & slots | |
| Interface type | Serial Attached SCSI (SAS) |
| Size & build | |
| Form factor | 3.5 in (8.89 cm) |
| Shipping weight | 4.99 kg |
| Package size | 25 × 25 × 25 mm |
The 15000 RPM spindle and 1.0-inch low-profile form factor are designed for server airflow; expect higher heat and noise than slower desktop drives, so adequate chassis cooling is essential.
A SAS host bus adapter, RAID controller, or server backplane with a native SAS port is required; the drive uses a standard SAS interface and 6Gb/s signalling.
The drive ships with a 3.5-inch tray and standard SAS connector, matching common server hot-swap bays that accept low-profile 1.0-inch SAS drives.
More in 3.5-Inch Internal Desktop HDDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?