We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver cylindrical annular cutter with pilot pin

Drill America

Drill America DWC5-530-142 Annular Cutter 1-3/16" x 1" with Pilot Pin

SKU CH-Q2VW-YBBYJ

A high-speed steel annular cutter with a 3/4" Weldon shank for magnetic drill presses, cutting only the material needed for a quality hole

  • Fast, efficient hole making with high-speed steel construction
  • 3/4" Weldon shank fits magnetic drill presses only
  • Hardness and toughness combine for wear resistance
  • Cuts only material needed for a quality hole
  • Includes pilot pin for accurate alignment

Drill America 1-3/16" Annular Cutter

This high-speed steel annular cutter produces a 1-3/16 inch diameter hole with a one inch depth of cut. It features a 3/4 inch Weldon shank for secure mounting in magnetic drill presses. The design removes only the perimeter material for fast, efficient hole making in general purpose applications.

Suited for magnetic drill press operators

This cutter is built exclusively for magnetic drill presses and must not be used in standard hand drills or conventional drill presses. Buyers who need a bit for portable hand-held drilling should look at twist drills or hole saws designed for that purpose.

Verify your magnetic drill press accepts 3/4"

Confirm the machine spindle or arbor matches the 3/4 inch Weldon shank before ordering. Ensure the workpiece thickness does not exceed the one inch cutting depth. Note the product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $44.99
Pricier than about 64% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameDRILL AMERICA

Questions about this item

What magnetic drill press do I need for the 3/4" Weldon Shank on this cutter?

You need a magnetic drill press that accepts a 3/4" Weldon Shank; standard hand drills or drill presses will not work.

Can I keep using my existing pilot pins with the DWC5-530-142?

The cutter includes a pilot pin matched to its 1" depth of cut; use the supplied pin for correct alignment.

How do I verify the cutter is performing correctly after installation?

It should produce a clean annular hole with a solid slug ejected by the pilot pin, showing smooth cutting action.

More in Bits, Hole Saws & Accessory Kits

Similar items