We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
DupliM Inc standalone SATA duplicator with two lockable 3.5 inch drive bays

DupliM Inc

DupliM Inc 1:1 SATA HDD/SSD Duplicator 120 MB/s

SKU CH-3S44-EA508

Standalone SATA duplicator clones or sanitises two 3.5-inch drives at up to 120 MB/s

  • Operating modeStandalone
  • Standalone cloning with no host PC required
  • Sector-by-sector copy creates exact drive replicas
  • Sanitize two drives simultaneously with 1-Pass or 3-Pass verify
  • Supports 3.5-inch SATA drives up to 8TB capacity
  • Transfer speeds up to 120 MB/s over SATA

Standalone 1:1 SATA Duplicator

The DupliM Inc duplicator performs sector-by-sector cloning from a SATA source drive to a SATA target drive without a host computer. It supports 3.5-inch SATA HDDs and SSDs up to 8 TB and 2.5-inch SATA drives with the optional 450100 adapter. The unit also sanitises up to two drives at once using 1-Pass or 3-Pass wipe with verify.

Lockable Quick-Access Bays

Drives slide into lockable, quick-access bays for tool-free installation and removal. The standalone design means no software drivers or operating-system configuration are required to start a copy or wipe job. Adapters for 2.5-inch SATA drives are sold separately under part number 450100, so buyers needing that form factor must order them in advance.

Sustained 120 MB/s Transfer Rate

The duplicator delivers up to 120 MB/s over the SATA interface during extended clone or sanitise operations. Fast data-only copy modes handle FAT16, FAT32, NTFS and Linux ext2/3/4 partitions to reduce job time when a full sector copy is unnecessary. Performance remains consistent across long sessions because the unit operates independently of host-system thermal or bus constraints.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $220.99
Cheaper than about 93% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

More details
Operating modeStandalone

Questions about this item

How can I verify the duplicator finished a sector-by-sector clone at the rated 120 MB/s transfer rate?

The standalone unit performs sector-by-sector copying from a SATA source to a SATA target; when the operation completes the front-panel indicators show the status so you can confirm the clone finished.

What is included with the duplicator and do I need DupliM adapters (part number 450100) for 2.5-inch SATA drives?

The duplicator has lockable quick-access bays for 3.5-inch SATA HDDs and SSDs up to 8 TB; 2.5-inch SATA drives require the separate DupliM adapters model 450100.

Which drive capacities and form factors are supported so I know which version to choose?

The unit supports 3.5-inch SATA HDDs and SSDs up to 8 TB, and 2.5-inch SATA drives when used with the optional DupliM adapters (part number 450100).

More in Disc, USB & SD Duplicators

Similar items