We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall black tower duplicator with 11 SATA drive bays and front control panel

DupliM Inc

DupliM Inc 140101 1:11 SATA Duplicator 11 targets 12 sanitize 120 MB/s 1536 MB buffer

SKU CH-ETKF-2VHCB MPN 140101

Standalone tower copies 11 SATA or IDE drives at once and sanitises 12 with DoD 7-pass, 120 MB/s transfer and 1536 MB buffer

  • Operating modeStandalone
  • Copies 11 drives at once for rapid deployment
  • Sanitizes 12 drives simultaneously with DoD 7-pass
  • Standalone operation needs no host computer
  • Transfers data up to 120 MB/s via SATA
  • 1536 MB buffer keeps large jobs flowing

1:11 SATA duplicator for high-volume deployment

The DupliM 140101 copies one source drive to eleven targets simultaneously and can sanitize twelve drives at once. It operates as a standalone tower, so no host computer is required during duplication or wiping. The unit accepts 2.5 and 3.5 inch SATA drives plus 3.5 inch IDE drives, with optional adapters for 2.5 inch IDE media. Maximum supported capacity exceeds 8TB per drive.

Thermals noise and power in normal operation

The duplicator runs on mains power and uses internal cooling fans to manage heat during extended copy or sanitize sessions. Transfer rates reach 120 MB/s per channel, keeping overall power draw steady while the 1536 MB buffer smooths data flow across all active ports. Noise levels remain consistent with typical office equipment during sustained workloads.

Build quality and connector layout for daily use

A tower chassis provides vertical drive bays that simplify loading and unloading without tools. SATA and IDE connectors are keyed to prevent misalignment, and the front-panel interface displays progress for each port independently. The standalone design means deployment only requires a power outlet and the drives themselves.

How it compares

Measured against everything we stock in Disc, USB & SD Duplicators, at today’s prices. Recalculated every night.

Price $2,476.99
Pricier than about 69% of the 714 comparable items (median $1,427.49).

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Specifications

Size & build
Shipping weight21.77 kg
Package size762 × 533 × 305 mm
More details
Operating modeStandalone

Questions about this item

How do I install the source and target drives in the 1:11 duplicator tower?

Insert the source SATA or IDE drive into the top slot and up to 11 target drives into the lower bays, then press the copy button; the step often missed is confirming every target shows ready before starting.

Which parts of the DupliM 140101 will need replacement after heavy use?

The SATA and IDE drive connectors and the cooling fans are the components most likely to wear out during repeated high-volume duplication cycles.

What limit appears first when running continuous 120 MB/s copies on all 11 targets?

The 1536 MB buffer fills first, causing the duplicator to throttle the transfer rate until the buffer clears.

More in Disc, USB & SD Duplicators

Similar items